E2EX5ME1 Datasheet, PDF (8/48 Pages) Omron Electronics LLC – Cylindrical Proximity Sensor

E2E/E2E2
E2E/E2E2
Specifications
Ratings/Characteristics
E2E
E2E-XjDj DC 2-wire Models
Item
E2E-X2Dj E2E-X4MDj E2E-X3Dj E2E-X8MDj E2E-X7Dj E2E-X14MDj E2E-X10Dj E2E-X20MDj
Size
M8
M12
M18
M30
Type
Shielded
Unshielded Shielded
Unshielded Shielded
Unshielded Shielded
Unshielded
Sensing distance
2 mm ±10% 4 mm ±10% 3 mm ±10% 8 mm ±10% 7 mm ±10% 14 mm ±10% 10 mm ±10% 20 mm ±10%
Supply voltage
(operating voltage
range)
12 to 24 VDC, ripple (p-p): 10% max., (10 to 30 VDC)
Leakage current
0.8 mA max.
Sensing object
Ferrous metal (refer to Engineering Data for non-ferrous metal)
Setting distance
0 to 1.6 mm 0 to 3.2 mm 0 to 2.4 mm 0 to 6.4 mm 0 to 5.6 mm 0 to 11.2 mm 0 to 8.0 mm 0 to 16.0 mm
Standard object
(mild steel)
8 x 8 x 1 mm 20 x 20 x
1 mm
12 x 12 x
1 mm
30 x 30 x
1 mm
18 x 18 x
1 mm
30 x 30 x
1 mm
30 x 30 x
1 mm
54 x 54 x
1 mm
Differential travel
15% max. of sensing distance 10% max. of sensing distance
Response frequency 1.5 kHz
1.0 kHz
1.0 kHz
0.8 kHz
0.5 kHz
0.4 kHz
0.4 kHz
0.1 kHz
Operation (with
sensing object
approaching)
D1 models: Load ON
D2 models: Load OFF
Control output
(switching capacity)
3 to 100 mA (5 to 100 mA for -M1J-T models)
Diagnostic output: 50 mA for -D1S models
Diagnostic output
delay
0.3 to 1 s
Circuit protection
Surge absorber, load short-circuit protection (for control and diagnostic output)
Indicator
D1 models: Operation indicator (red LED), operation set indicator (green LED)
D2 models: Operation indicator (red LED)
Ambient temperature Operating: –25°C to 70°C (with no icing)
Ambient humidity
Operating: 35% to 95%
Temperature influence
±15% max. of sensing
distance at 23°C in
temperature range of –25°C
to 70°C
±10% max. of sensing distance at 23°C in temperature range of –25°C to 70°C
Voltage influence
±1% max. of sensing distance in rated voltage range ±15%
Residual voltage
(see note)
3.0 V max. (under load current of 100 mA with cable length of 2 m)
5.0 V min. for -M1J-T models
Insulation resistance 50 MΩ min. (at 500 VDC) between current carry parts and case
Dielectric strength
1,000 VAC for 1 min between current carry parts and case
Vibration resistance
Shock resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 10 times each in X, Y, and Z directions
Destruction: 500 m/s² for 10
times each in X, Y, and Z
directions
Destruction: 1,000 m/s² for 10 times each in X, Y, and Z directions
Degree of protection IEC60529 IP67
Weight
Approx. 45 g
Approx. 120 g
Approx. 160 g
Approx. 220 g
Material
Case
Stainless steel
Brass
Sensing PBT
surface
Note: The residual voltage of each E2E model with the model number suffix “-M1J-T” is 5 V. When connecting an E2E model with the suffix
“-M1J-T” to a device, make sure that the device can withstand the residual voltage.
8