G3J-T-C Datasheet, PDF (6/8 Pages) Omron Electronics LLC – Solid State Contactor for 3-phase Motors with Built-in Soft Start/Stop and Monitor Output

Time Chart
Power supply for
internal drive
G3J-T-C
Control input signal
Operation indicator lit
Monitor output
Monitor output operate time
Ramp-up time
Ramp-down time
Monitor output release time
Load current
Rated current
Note: 1. The soft-start time and soft-stop time depend on the load characteristics (e.g., inertia and friction factor) in addition to the starting torque,
ramp-up time, and ramp-down time. Therefore, the soft-start time or soft-stop time will not increase beyond a certain point if the ramp-up
time and ramp-down time are increased.
2. Due to the soft-stop control characteristics, the load current continues flowing even after the motor stops. Set to the optimum value
according to the application.
3. The operation indicator will light synchronized with the monitor output.
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G3J-T205BL-C
15.85
G3J-T211BL-C
34.9
72
54.5
107.9
37.1
Input terminals
Three, M3 × 8
50 max.
4.6 dia. _{Stating torque adjuster}
Ramp-up time adjuster
100 max. 90 89
Monitor
output
Two, M3 × 8
Operation
indicator
4.6 × 5.6
Oval hole
5.5
13.2 13.2
80 max.
Output
terminals
Six, M4 × 8
7.6
120 max.
Ramp-down time adjuster
Mounting Hole
Dimensions
Two, 4.5-dia. or
M4 holes
90^±0.2
50 ^±0.2
6