E5CK-AA1-500 Datasheet, PDF (6/14 Pages) Omron Electronics LLC – Advanced, 1/16-DIN Ramp/Soak Process Controllers Ideal for Worldwide Use

Installation
J Main Parts
Terminals
Output Board
Housing
J Setting Up the Output Board
1. Two rectangular holes are provided on the power board (right
side of Controller). Fit the two protrusions of the output board
into these two holes.
2. With the output board fitted into the power board, fit the out-
put board into the connector on the control board (left side of
Controller).
1
2
Input type
connector
Option Board
Front panel
J Removing Internal
Mechanism
While pressing the hooks on the left and right sides of the front
panel, carefully pull the internal mechanism from the housing.
(Refer to the drawing below.)
Ramp/Soak Process Controller E5CK--T A--185