E39R1 Datasheet, PDF (6/24 Pages) Omron Electronics LLC – Photoelectric Sensors E3F2

Specifications
■ Ratings / Characteristics of DC Switching Models
Item
E3F2-7@ E3F2-10@ E3F2-R2@4-@ E3F2-R2R@ E3F2-R4@-@ E3F2-DS10@ E3F2-DS30@ E3F2-
E3F2-
D1@4-@ LS10@4-@
Sensing method
Through-beam
Retroreflective
Diffuse reflective
- multi
purpose
- Precision Non-
detection [6.] polarizing
- test input
Polarizing
Wide beam Adjustable sensing distance Background
characteristic
suppression
Power supply voltage 10 to 30 V DC 12 to 24 V DC 10 to 30 V DC
Current consumption 50 mA max.
25 mA max.
30 mA max.
25 mA max. 30 mA max.
Rated sensing distance 7 m
[1.]
10 m
0.1 - 2 m
(with reflector E39-R1)
0.1 - 4 m
(with reflector
E39-R1S)
0.1 m
0.3 m
(5 x 5 cm white (10 x 10 cm
mat paper) white
mat paper)
1m
(30 x 30 cm
white
mat paper)
0.1 m
(10 x 10 cm
white
mat paper)
Typical sensing distance –
for different reflector
types (ref. to accesso-
ries) [2.]
E39-R1:
E39-R7:
E39-R8:
4.0 m E39-R1:
E39-R1S:4.3 m –
4.5 m axial 3.7 m E39-R7: 4.8 m
5.3 m ^{radial 2.4 m} E39-R8: 5.6 m
E39-R7:
E39-R40: 4.3 m
axial
radial
4.2 m
2.7 m
E39-RS3:
2m
E39-R8:
axial 5.3 m
radial 3.1 m
Standard object
Opaque: 11 mm dia. min. Opaque: 56 mm dia. min.
–
Directional angle
3° to 20°
–
Differential travel
–
(hysteresis)
20% max.
5% max
Black/white error
–
3%
Response time
Operation and Reset: 2.5 ms max.
1 ms max
2.5 ms max.
1 ms max.
Control output
Transistor (open collector), load current: 100 mA max. (residual voltage: 2 V max.)
Power reset time
50 ms
100 ms max. 50 ms
100 ms
Ambient illumination Incandescent lamp: 3000 lx max. / Sunlight: 10000 lx max.
Ambient temperature Operating: -25 to 55 °C / Storage: -30 to 70 °C (with no icing or condensation)
Ambient humidity
Operating: 35% to 85% / Storage: 35% to 95% (without condensation)
Insulation resistance 20 MΩ min. at 500 V DC between energized parts and case
Dielectric strength
1000 VAC max., 50 / 60 Hz for 1 min between energized parts and case
Vibration resistance
10 to 55 Hz, 1.5 mm double amplitude for 2 hrs each direction (X, Y, Z)
Shock resistance
Destruction: 500 m/s² each direction (X, Y, Z)
Enclosure ratings
IP67 [3.]; NEMA 1, 2, 4
Light source
Infrared LED (880 nm/850 nm)
Red LED (660 nm)
Infrared LED (880 nm)
Red LED
(660 nm)
Indicators
Light incident Output
Light incident / power
/ power indi- (orange) / indicator for light source (red)
cator for light light emission
source (red) (red)
Light incident Light incident / power indicator Light incident Output
(red) /
for light source (red)
(red) /
indicator
stability (green)
stability
(orange) / sta-
(green)
bility (green)
Sensitivity adjustment Fixed
Fixed /
Adjustable
Fixed
Adjustable
Fixed
Connection method
2 m, 5 m pre-wired cable (PVC, dia. 4 mm (18 / 0.12) [4.]) or M12-connector
Test Input
–
[7.]
–
Operation mode
Light-ON or Dark-ON selectable by wiring
Weight (approx.)
Plastic pre-wired (2 m) 120 g
60 g
case _connector
40 g
20 g
Metal pre-wired (2 m) 180 g
90 g
case _connector
120 g
50 g
Circuit protection
Output short-circuit and power supply reverse polarity
Housing materials
Plastic (case: ABS; lens: PMMA)
Nickel brass Nickel brass –
Nickel brass Nickel brass Nickel brass Nickel brass Nickel brass Nickel brass
Stainless
–
–
steel [5.]
Stainless
–
steel [5.]
Stainless
Stainless
–
–
steel [5.]
steel [5.]
Note: 1. For stable sensing distance in detail, please refer to “Engineering Data”
2. Typical sensing distance corresponds to 80% of the max. sensing distance.
3. The enclosure rating IP67 of OMRON internal standards correspond to stricter test requirements than the standard IEC 60529 (refer to
chapter “Precautions”)
4. For other cable materials (e.g. PUR) please contact your OMRON sales representative.
5. Material-specification for stainless steel housing case: 1.4305 (W.-No.), 303 (AISI), 2346 (SS). For other stainless steel materials please
contact your OMRON sales representative.
6. with slit E39-ES18
7. PNP models -B4: V_CC to V_CC -2.5 V: Emitting OFF (Source current: 3 mA max.) / Open or 0 to 2.5 V: Emitting ON (Leakage current: 0.1
mA max.)
NPN models -C4: 0 to 2.5 V: Emitting OFF (Source current: 3 mA max.) / Open or Vcc to Vcc -2.5 V: Emitting ON (Leakage current: 0.1
mA max.)
6
Photoelectric Sensors E3F2