E3JM-R4M4-US Datasheet, PDF (5/13 Pages) Omron Electronics LLC – Built-in Power Supply Photoelectric Sensor

E3JM/E3JK
E3JK
Sensing method
Through-beam model
Retro-reflective model
(with MSR function)
Retro-reflective model
(without MSR function)
Diffuse-reflective model
Item
Model
E3JK
-5M@-N
E3JK
-5S3-N
E3JK
-R2M@
E3JK
-R2S3
E3JK
-R4M@
E3JK
-R4S3
E3JK
-DS30M@
E3JK
-DS30S3
Sensing distance 5 m
2.5 m (When using E39-R1) 4 m (When using E39-R1)
White paper (100 × 100 mm):
300 mm
Standard sensing
object
Opaque: 14.8-mm dia. min.
Opaque: 75-mm dia. min.
---
Differential travel
---
20% max. of sensing distance
Directional angle
Both Emitter and Receiver 3° to
20°
1° to 5°
---
Light source
(wavelength)
Infrared LED (950 nm)
Red LED (660 nm)
Infrared LED (950 nm)
Power supply
voltage
12 to 240 VDC±10%, ripple (p-p): 10% max.
24 to 240 VAC±10%, 50/60 Hz
Power DC
con-
sump-
tion
AC
3 W max. (Emitter 1.5 W
max. Receiver 1.5 W max.)
3 W max. (Emitter 1.5 W
max. Receiver 1.5 W max.)
2 W max.
2 W max.
Control output
Relay output
SPDT,
250 VAC, 3 A
max.
(cosφ= 1)
5 VDC, 10 mA
min.
DC SSR out-
put, Negative:
common
48 VDC,
100 mA max.
Leakage cur-
rent: 0.1 mA
max.
With load
short-circuit
protection
Relay output
SPDT,
250 VAC, 3 A
max.
(cosφ= 1)
5 VDC, 10 mA
min.
DC SSR out-
put, Negative:
common
48 VDC,
100 mA max.
Leakage cur-
rent: 0.1 mA
max.
With load
short-circuit
protection
Relay output
SPDT,
250 VAC, 3 A
max.
(cosφ= 1)
5 VDC, 10 mA
min.
DC SSR out-
put, Nega-
tive: common
48 VDC,
100 mA max.
Leakage cur-
rent: 0.1 mA
max.
With load
short-circuit
protection
Relay output
SPDT,
250 VAC, 3 A
max.
(cosφ= 1)
5 VDC, 10 mA
min.
DC SSR out-
put, Negative:
common
48 VDC,
100 mA max.
Leakage cur-
rent: 0.1 mA
max.
With load
short-circuit
protection
Life ex-
pectan-
Mechani-
cal
50,000,000 times min. (switching frequency: 18,000 times/h)
cy (relay
output) ^{Electrical 100,000 times min. (switching frequency: 1,800 times/h)}
Response time
30 ms max. 10 ms max. 30 ms max. 5 ms max.
30 ms max. 5 ms max. 30 ms max. 5 ms max.
Sensitivity
adjustment
---
One-turn adjuster
Ambient illumina-
tion
(Receiver side)
Incandescent lamp: 3,000 lx max.
Ambient
temperature range
Operating: −25°C to 55°C, Storage: −30°C to 70°C (with no icing or condensation)
Ambient
humidity range
Operating: 45% to 85% (with no condensation), Storage: 35% to 95% (with no condensation)
Insulation
resistance
20 MΩ min. at 500 VDC
Dielectric strength 1,500 VAC, 50/60 Hz for 1 min.
Vibra-
tion re-
sistance
Destruc-
tion
Malfunc-
tion
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock
resis-
tance
Destruc-
tion
Malfunc-
tion
500 m/s² 3 times each in X, Y, and Z directions
100 m/s² 3
500 m/s² 3
100 m/s² 3
500 m/s² 3
100 m/s² 3
500 m/s² 3 100 m/s² 3
500 m/s² 3
times each in times each in times each in times each in times each in times each in times each in times each in
X, Y, and Z di- X, Y, and Z di- X, Y, and Z di- X, Y, and Z di- X, Y, and Z di- X, Y, and Z di- X, Y, and Z di- X, Y, and Z di-
rections
rections
rections
rections
rections
rections
rections
rections
Degree of
protection
IEC 60529 IP64
Connection method Pre-wired (standard length: 2 m)
Weight
(packed state)
Approx. 420 g
Approx. 250 g
Case
ABS (Acrylonitril Butadiene Styrene)
Material ^Lens
Mounting
Bracket
Methacrylic resin
Iron
Accessories
Mounting Bracket (with screws), Nuts, Instruction manual, Reflector (Retro-reflective Models only)
5