G3NA-6 Datasheet, PDF (4/14 Pages) Omron Electronics LLC – Solid State Relays (600 VAC Models)

Dimensions
■ Relays
Note: All units are in millimeters unless otherwise indicated.
G3NA-610B, G3NA-625B
Two, M5 x 12 screws
Mounting Holes
Two, 4.3-dia.
or M4 holes
G3NA-650B
58 max.
47.5 44
12±0.4
4.5
8.2
25
43 max.
4.5 dia.
Operating
indicator
Two, M4 x 2
screws
Two, M5 x 12 screws
47.6±0.2
16.8
26 max.
28 max.
Mounting Holes
Two, 4.3-dia.
or M4 holes
58 max.
47.5 44
12±0.4
4.5
8.2
25
43 max.
4.5 dia.
Operating
indicator
Two, M4 x 2
screws
47.6±0.2
16.8
26 max.
28 max.
■ Optional Accessories (Order Separately)
One-touch Mounting Plate
The One-touch Mounting Plate is used to mount the G3NA to a DIN
Track.
R99-12 FOR G3NA (for the G3NA and G3NE)
Two, M4 mounting
holes for the G3NA
To mount the Relay to DIN
Track, first mount it to the
One-touch Mounting Plate
and then attach it to the DIN
Track as shown in the
diagram.
Terminal Arrangement/
Internal Connections
(Top View)
Load
Output
1
2 _Load
power
supply
(−)
(+)
4
3
Input
Terminal Arrangement/
Internal Connections
(Top View)
Load
Output
1
2 _Load
power
supply
(−)
(+)
4
3
Input
Two, M4 mounting
30
holes for the G3NE
44
To remove the Relay from
the DIN Track, pull down on
the tab with a screwdriver in
the direction of the arrow.
• When a Relay is mounted to DIN Track, use it within the rating for a
Relay without a heat sink.
• Use the following DIN Tracks: PFP-100N or PFP-100N2.
470
Solid State Relays (600 VAC Models) G3NA-6