E3XA51 Datasheet, PDF (4/17 Pages) Omron Electronics LLC – Fiber-Optic Photoelectric Sensor

E3X
Nomenclature
E3X-H11
Stable Operation
Indicator (Green Indicator)
Sensitivity Indicator
The position of the indicator
can be checked.
8-turn Sensitivity
Adjuster
Mode Selector
SET:
The light source
flashes. Set to this
mode to adjust the
light axis.
L-ON: Output transistor
is ON when light
is received.
D-ON: Output transistor
is ON when light
is not received.
Light Reception
Indicator (Red Indicator)
Hysteresis Adjuster
Timer Switch
ON: Timer function
is ON.
OFF: Timer function
is OFF.
Light Reception
Monitoring Terminal
Monitoring is used with
the E39-VX Beam Checker
E3X-A21/-A51
E3X-F21/-F51
E3X-VG21
Stable Operation
Indicator (Green Indicator)
Sensitivity Indicator
Timer Sensitivity
Adjuster
Mode Selector
SET:
The light source
flashes. Set to this
mode to adjust the
light axis.
L-ON: Output transistor
is ON when light
is received.
D-ON: Output transistor
is ON when light
is not received.
Light Reception
Indicator (Red Indicator)
Timer Switch
ON: Timer function
is ON.
OFF: Timer function
is OFF.
Light Reception
Monitoring Terminal
Monitoring is used with
the E39-VX Beam Checker
E3X
E3X-A11/-A41
E3X-VG11
Stable Operation
Indicator (Green Indicator)
8-turn Sensitivity
Adjuster
Light Reception
Indicator (Red Indicator)
Sensitivity Indicator
Sensitivity adjustment
can be checked visually.
Mode Selector
SET:
The light source
flashes. Set to this
mode to adjust the
light axis.
L-ON: Output transistor
is ON when light
is received.
D-ON: Output transistor
is ON when light
is not received.
Light Reception
Monitoring Terminal
Monitoring is used with
the E39-VX Beam Checker
Note: Set the mode selector to L-ON or D-ON after
the light axis is adjusted.
5
5