E32-D22B Datasheet, PDF (33/67 Pages) Omron Electronics LLC – These Fibers Units can be used in a variety of applications, such as detecting the presence of workpieces and positioning.

Ordering Information
Application-corresponding Fiber Units
High-resolution mode
Standard mode
(
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
Dimen-
Type Appearance (mm) *2 sions
page
Sensing distance (mm)
Standard object Min. bend-
(min. sensing ing radius
object) (mm)*1 (mm)
Features
Model num-
ber
10
57
10
10 (10)
43
Slot sensor (no
adjustment of op- E32-G14
tical axis required)
4 dia. (0.1 dia.) R25
4,500
3,400
2,250 (900)
Screw mounting,
side-view
E32-T14
Applicable tube: Transparent tube with a diameter
57
in the range 8 to 10 mm and a recommended wall R10 Compact
thickness of 1 mm
E32-L25T
57
Applicable tube: Transparent tube (no restriction on
diameter)
No restriction on
tube diameter, re-
sistant to bubbles
and drops of water
E32-D36T
58
Applicable tube: Transparent tube with a diameter
of 3.2, 6.4, or 9.5 mm and a recommended wall
thickness of 1 mm
R4
Light ON when fluid
is present, resistant
to bubbles and
E32-A01
drops of water
Applicable tube: Transparent tube with a diameter
58
in the range 6 to 13 mm and a recommended wall
thickness of 1 mm
Light ON when fluid
is not present, re-
sistant to bubbles
E32-A02
and drops of water
58
Liquid-contact models
R40
Heat resistant up
to 200°C,
fluororesin cover
E32-D82F1
E32-D82F2
0 to 15
54
0 to 15
0 to 15 (0 to 12)
10 to 20
58
10 to 20
10 to 20 (-)
15 to 25
58
15 to 25
10 to 20 (-)
Soda glass
with reflection
factor of 7%
E32-L16-N
Variation of detec-
tion position within E32-A08
the detection
range: 0.1 mm _E32-A07E1
R25
*5
E32-A07E2
*5
5 to 18
58
5 to 18
5 to 16 (-)
Heat resistant up
to 300°C *3, *4
E32-L66
10 to 20
54
10 to 20
10 to 20
Heat resistant up
to 300°C
E32-A08H2
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
*3. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.
*4. These values are based on the assumption that there are no repeated sudden changes in temperature.
*5. The characteristics for sensing object incline are different between the Attachments with model numbers ending in "E1" and "E2."
Refer to page 52 for installation precautions.
33