D2VW Datasheet, PDF (3/8 Pages) Omron Electronics LLC – Sealed Snap Action Switch

■ Approved Standards
UL Recognized, CSA Certified
Rated Voltage
125 VAC
250 VAC
30 VDC
D2VW-5
3A
3A
---
D2VW-01
0.1 A
---
0.1 A
EN 61058-1 (VDE Approval)
Rated Voltage
125 VAC
250 VAC
D2VW-5
---
3A
D2VW-01
0.1 A
---
Testing conditions:
25E3 (25,000 operations), T85 (0°C to 85°C) for D2VW-5
1E5 (100,000 operations), T85 (0°C to 85°C) for D2VW-01
Engineering Data
■ Contact Specifications
Item
Specification
Material
Gap (standard value)
Inrush current
Minimum applicable load
(see note)
D2VW-5
D2VW-01
Rivet
Crossbar
Silver alloy
Gold alloy
0.5 mm
NC: 15 A max.
NO: 15 A max.
---
160 mA at 5 VDC 1 mA at 5 VDC
Note: Minimum applicable loads are indicated by N standard refer-
ence values. This value represents the failure rate at a 60%
(_Tλ_h6e0)erqeuliaatbioilnity_λ6le₀v=e0l.(5JxIS1C0_-5₆0/0o3p)e. _{rations indicates that a failure}
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
■ Structure
SPDT
SPST-NC
NC (red)
NO (blue)
COM (black)
Note: Colors in parentheses indicate lead wire colors.
■ Mounting
All switches may be panel mounted using M3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.39 to 0.59 N·m.
Two, 3.1-dia. mounting holes or
M3 screw holes
NC (red)
COM (black)
SPST-NO
NO (blue)
COM (black)
10.3 ± 0.1
22.2 ± 0.1
Sealed Snap Action Switch D2VW 209