D2VW Datasheet, PDF (1/8 Pages) Omron Electronics LLC – Sealed Snap Action Switch

Sealed Snap Action Switch
D2VW
Watertight Miniature Snap Action Switch
• High-quality watertight, high-precision miniature Snap
Action switch. Switch Body meets IP67 requirements
• Use of epoxy resin assures high sealing capability and is
ideal for dusty places or where water is sprayed
• V-series internal mechanism assures high precision and
long life
• General-load (5 A at 250 VAC) models and micro-load
models are available
• RoHS Compliant
Ordering Information
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
Terminal
With solder and #187 tab terminals
With lead wires
With solder and #187 tab terminals
With lead wires
With solder and #187 tab terminals
With lead wires
With solder and #187 tab terminals
With lead wires
With solder and #187 tab terminals
With lead wires
With solder and #187 tab terminals
With lead wires
With solder and #187 tab terminals
With lead wires
Model
Model 0.1 A
D2VW-01-1HS
D2VW-01-1MS
D2VW-01L1A-1HS
D2VW-01L1A-1MS
D2VW-01L1-1HS
D2VW-01L1-1MS
D2VW-01L1B-1HS
D2VW-01L1B-1MS
D2VW-01L3-1HS
D2VW-01L3-1MS
D2VW-01L2A-1HS
D2VW-01L2A-1MS
D2VW-01L2-1HS
D2VW-01L2-1MS
Model 5 A
D2VW-5-1HS
D2VW-5-1MS
D2VW-5L1A-1HS
D2VW-5L1A-1MS
D2VW-5L1-1HS
D2VW-5L1-1MS
D2VW-5L1B-1HS
D2VW-5L1B-1MS
D2VW-5L3-1HS
D2VW-5L3-1MS
D2VW-5L2A-1HS
D2VW-5L2A-1MS
D2VW-5L2-1HS
D2VW-5L2-1MS
Note: 1. The standard lengths of the lead wires (UL1015 AWG20 for UL/CSA models, AV0.75f otherwise) of models incorporating them are 30 cm.
2. Remove “-HS” from the end of solder/quick-connect models to obtain non-UL/CSA versions. (e.g.: D2VW-01-1HS → D2VW-01-1)
3. Remove “S” from the end of lead wire models to obtain non-UL/CSA versions with AV0.75f wire. (e.g.: D2VW-5L3-1MS → D2VW-5L3-1M)
Model Number Legend
D2VW- -
1 2 34
1. Ratings
2. Actuator
3. Contact Form
4. Terminals
5: 5 A at 250 VAC
01: 0.1 A at 30 VDC
None:
L1A:
L1:
L1B:
L3:
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
1:
SPDT
2:
SPST-NC*
3:
SPST-NO*
*Lead wire versions only
None, HS: Solder terminals
(HS for UL and CSA approval.)
M, MS: Molded lead wires
(MS for UL and CSA approval)
L2A: Short hinge roller lever
L2: Hinge roller lever
Sealed Snap Action Switch D2VW 207