NS-SERIES Datasheet, PDF (20/57 Pages) Omron Electronics LLC – Programmable Terminals

Screen Data Security Functions
Protect important screen data with a
password.
If password protection is set in the data transfer
security settings when the screen data is designed, a
password must be entered to download or upload the
screen data, so important screen data can be
protected.
Security password
Download
Upload
If a password has been set, the password is required to transfer screen
data (download or upload) with the Memory Card.
A password between 4 and 64
characters long can be set. The
download/upload will start if the user
inputs the password that was set when
the screen was designed. (Password
input will be disabled if the wrong
password is input 3 times in a row.)
Download
Upload
Device Data Transfer
Easy Data Exchange between the PLC
and Components
For example, temperature controller alarm values can
be transferred to the DM Area of the PLC's CPU Unit.
No communications programming or macros are
required.
Multi-vendor Support
NS
Temperature
controller
PLC
Modbus device
C10004 80
C10005 100
C10006 30
DM0300 80
DM0302 100
DM0304 30
PLC from other
company
Multi-vendor Support
Devices from multiple vendors are supported.
Data can be easily exchanged with PLCs from other
companies and Modbus devices.
Easy Settings
To make the settings, simply specify the device and
addresses of the transfer source and transfer
destination in the CX-Designer. Settings can be made
using the same procedure as for setting the
addresses for normal components.
Easier Operation when Combining
SAP Library Objects
SAP data can also be exchanged. SAP data can be
exchanged by checking the address of the SAP data
in the dialog box of the SAP object pasted in the
CX-Designer and specifying that address as the
transfer source address.
Note 1: EtherNet/IP tags are not supported.
Note 2: CX-Designer version 3.1 or higher is required.
NS system version 8.2 or higher is required.
20
Easy Settings
NS
Temperature
controller
PLC
C10004
C10005
C10006
80 Alarm value 1
100 Alarm upper limit value 1
30 Alarm lower limit value 1
DM0300 80
DM0302 100
DM0304 30
CX-Designer Select Device Data Transfer Setting from the PT Menu.
Make the settings simply
by specifying the
addresses of the transfer
source and transfer
destination as well as the
number of data items.