NS-SERIES Datasheet, PDF (16/57 Pages) Omron Electronics LLC – Programmable Terminals

Direct Connection to Temperature Controllers
Connect OMRON Temperature Controllers directly to the NS-series PT.
OMRON Temperature Controllers can be connected directly to the NS-series PT's RS-232C port.
Data does not pass through the PLC, so ladder programming is not required. Also, there are plenty
of objects in the SAP Library for Temperature Controllers, and Temperature Controller screens can
be created easily just by pasting objects from the SAP Library to the screens.
Note: An RS-422A Serial Adapter is needed to connect directly to a Temperature Controller. Refer to page 53 for a list of the
Temperature Controllers that can be connected. A Conversion Unit is not required to connect to the RS-422A/485 serial
interface of the NS15.
CJ1W-CIF11
RS-422A Serial Adapter
OMRON
Temperature
Controllers
OMRON
Temperature
Controllers
Face Plate Auto-Builder for NS
Screens for Loop Controllers can be easily and
automatically created.
Significantly reduces the effort required to combine a Loop Controller with an
NS-series PT.
Easy automatic generation of faceplates, such as faceplates for PV monitoring and SV
setting, as well as tuning screens, such as screens to set and autotune PID constants.
A total of 17 function blocks are supported, with eleven function blocks, such as Ratio
Setting and Motor Manipulators newly supported (version 3 of higher).
Comments are automatically entered for automatically assigned unit and scale settings
when a project is generated (version 3 and higher).
CX-Process Tool
(Loop Controller Programming
Software)
Loop Controller program
creation (function block method)
CSV tag file output
CSV tag file for
Loop Controller
NS project file
NS Series
Face Plate
Auto-Builder for NS
Created screens are easily
transferred to the NS by using a
Memory Card or over the network.
SYSMAC CS/CJ-series Loop Controller
CX-Designer
(NS screen creation software)
Editing created data
Creation of other required
screens
Note: Refer to the PLC-based Process Control Catalog (Cat. No. P051) and the Loop-control CPU Unit Catalog (Cat. No. R128) for details on Loop Controllers.
16