E39-S46 Datasheet, PDF (2/21 Pages) Omron Electronics LLC – Built-in Amplifier Photoelectric Sensor (Medium Size)

E3S-A
Sensing method Appearance
Connection
method
Sensing distance
100 mm (wide view)
Functions
---
Timer
Self Diagnosis
Model
NPN output
PNP output
E3S-AD13 *3
E3S-AD33
E3S-AD23
E3S-AD43
Diffuse-reflective
Sensors
Pre-wired
Horizontal
200 mm
700 mm
Connector
(M12)
100 mm (wide view)
200 mm
700 mm
100 mm (wide view)
---
Timer
Self Diagnosis
Turbo
---
Timer
Self Diagnosis
Turbo
---
---
Timer
Self Diagnosis
E3S-AD11
E3S-AD21
E3S-AD12
E3S-AD22
E3S-AD18
E3S-AD16
E3S-AD17
E3S-AD63 *3
E3S-AD73
E3S-AD31
E3S-AD41
E3S-AD32
E3S-AD42
E3S-AD38
E3S-AD36
E3S-AD37
E3S-AD83
E3S-AD93
Vertical
Pre-wired
200 mm
700 mm
---
Timer
Self Diagnosis
Turbo
---
Timer
Self Diagnosis
E3S-AD61
E3S-AD71
E3S-AD62
E3S-AD72
E3S-AD81
E3S-AD91
E3S-AD82
E3S-AD92
100 mm (wide view)
Connector
(M12)
200 mm
---
700 mm
*3. The following models are available with 200-mm sensing distances: E3S-AD14 and E3S-AD64.
E3S-AD68
E3S-AD66
E3S-AD67
E3S-AD88
E3S-AD86
E3S-AD87
Accessories (Order Separately)
Insert-type Long Slit
Slit width
Sensing distance
Minimum sensing
object (typical)
0.5 mm × 11.1 mm
500 mm
0.2-mm dia.
1 mm × 11.1 mm
1.1 m
0.4-mm dia.
2 mm × 13.6 mm
2.5 m
0.8-mm dia.
Model
E39-S46
Quantity
1 of each for Emitter/
Receiver (4 Slits total)
1 of each for Emitter/
Receiver (2 Slits total)
Remarks
Slits can be used with the E3S-
AT@@ Through-beam
Sensor.➜Page 10
Mutual Interference Prevention Filters
Sensing distance
2.4 m
Model
E39-E6
Quantity
Remarks
2 of each for Emitter/Receiver Can be used with the E3S-AT@@ Through-beam Sensor.
(4 Filters total)
➜ Page 11
Reflectors/Other Accessories
Name
Sensing distance (typical)
Model
Quantity
Remarks
Reflectors
2 m (100 mm) *
(rated value)
E39-R1
1 Provided with E3S-AR@@ Retro-reflective Sensor.
1.3 m (100 mm) *
E39-R3
1
---
Small Reflectors
600 mm (70 mm) *
E39-R4
1
---
450 mm (100 mm) *
E39-RS1
1
Tape Reflectors
Optical Axis
Confirmation Reflector
700 mm (100 mm) *
900 mm (100 mm) *
---
E39-RS2
E39-RS3
E39-R5
1 Enables MSR function.
1
1
Used to check optical axis for the E3S-AT@@
Through-beam Sensor.
Note: When using any Reflector other than the provided one, use a sensing distance of approximately 0.7 times the typical value as a guide.
* Values in brackets are the minimum required distance between the Sensor and Reflector.
2