E39-S46 Datasheet, PDF (15/21 Pages) Omron Electronics LLC – Built-in Amplifier Photoelectric Sensor (Medium Size)

E3S-A
Connector Sensors
E3S-AT66/86 (Receiver)
With Mounting Bracket Attached
Optical axis
8.3
Optical
axis
31.4 19.4
Use these
two holes
for
mounting.
3.1
Stainless steel
(SUS304)
20
5.4
7.2
41.7
Lens (7 × 7)
13.5
Optical axis
40
12
Stability
indicator _{LIght indicator (red)}
(green)
Sensitivity
1.3
3.6
adjuster
(white)
7
21
M12
Connector
(10)
Operation
mode
selector
switch
29.2
1.2 _10.7
A*
E39-L60 Close Mounting Plate (provided)
(Attach the mounting plate or the
plug cannot be connected.)
10.5
20
*The Mounting Bracket can be attached to side A.
Two, M3 × 12 screws
10.5
20
Two, M3 × 12 screws
Mounting Holes
Two, M3 holes
20
E3S-AT66/86 (Emitter)
With Mounting Bracket Attached
Optical axis
8.3
Optical
axis
31.4 19.4
Stainless steel
(SUS304)
20
7.2
41.7
Lens (7 × 7)
13.5
Use these
two holes
12
for
mounting.
3.1
Power indicator (red)
1.3
5.4
8.5
21
Optical axis
40
M12 Connector
(10)
29.2
1.2 _10.7
A*
E39-L60 Close Mounting Plate (provided)
(Attach the mounting plate or the
plug cannot be connected.)
*The Mounting Bracket can be attached to side A.
10.5
20
Two, M3 × 12 screws
10.5
20
Two, M3 × 12 screws
Mounting Holes
Two, M3 holes
20
Note: Models numbers for Through-beam Sensors (E3S-AT@6) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT66-L 2M), the model number of the Receiver, by adding "-D"
(example: E3S-AT66-D 2M). Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
15