E39-S46 Datasheet, PDF (13/21 Pages) Omron Electronics LLC – Built-in Amplifier Photoelectric Sensor (Medium Size)

E3S-A
Sensors with Standard Connectors
E3S-AT16/36 (Receiver)
Optical axis
With Mounting Bracket Attached
Optical
axis
28.9 16.9
3.1 7.2
5
10.5
20
35.5
7.2 Stainless
steel
(SUS304)
29.2
5.5
1.2 _10.7
A*
*The Mounting Bracket can be attached to side A.
Two, M3 × 12 screws
E3S-AT16/36 (Emitter)
Optical axis
With Mounting Bracket Attached
Optical
axis
28.9 16.9
3.1 7.2
5
10.5
20
35.5
7.2 ^Stainless
steel
(SUS304)
29.2
5.5
1.2 _10.7
A*
*The Mounting Bracket can be attached to side A.
Two, M3 × 12 screws
Light indicator
(red)
12.9
Sensitivity adjuster (white)
M12 Connector
40
(10)
7
12.4 12
Stability indicator (green)
Lens (7 × 7) Optical axis
1.3
21
8
Operation mode
selector switch
10.5
20
Two, M3 × 12 screws
Mounting Holes
Two, M3
20
12.4 12
Power indicator (red)
40
17.8
M12 Connector
(10)
Lens (7 × 7) ^{Optical axis}
21
8
1.3
10.5
20
Two, M3 × 12 screws
Mounting Holes
Two, M3
20
Note: Models numbers for Through-beam Sensors (E3S-AT@6) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT16-L 2M), the model number of the Receiver, by adding "-D"
(example: E3S-AT16-D 2M). Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
13