DRT2-TS04P Datasheet, PDF (2/28 Pages) Omron Electronics LLC – Remote I/O Terminals with Transistors

Use production site information in a variety of applications,
such as maintenance and quality control.
OMRON's DRT2-series Smart Slaves do not just input and output ON/OFF signals. They collect a variety
of value-added information to help increase the rate of operation without changing the wiring for
existing DeviceNet networks. In particular, they allow the separation of control systems and
maintenance systems so that maintenance systems can be created independently of control systems.
Control System
PLC
Control I/O
Maintenance is
required for
cylinder 23A in
inspection line A!
Maintenance System
2 Easy-to-view
Display
Configurator
Maintenance information
Operating time, contact operation
counter
DRT2-series
Smart Slave
1Machine Operation
Monitored by Slave
Measuring
The Slave Unit represents
machine operating time and
operational changes as data,
enabling monitoring without
increasing the load between
controllers.
Counting
By counting the number of
ON/OFF operations and the
total operating time, the Slave
Unit can provide notification
when maintenance is required.
3 Faster Maintenance
Work
The Slave can hold comments, allowing
quick identification of fault locations and
faulty devices.
Sensor
(Connected device
comment)
Pneumatic valve
(Connected device
comment)
Cylinder
(Connected device comment)
Collect a variety of data from maintenance systems without
influencing control systems and productivity.
All data can be converted to electronic format and,
by combining with an OMRON PLC (CS/CJ Series),
checked directly from Ethernet or the Internet to
allow remote maintenance.
Information monitoring for
each Slave
Slave comment
Status confirmation using the status icon
Operating time monitor error or contact
operation count monitor error
Unit conduction time monitor error
Communications power voltage monitor error
2