H3CRFAC100240 Datasheet, PDF(14/23 Page) Omron Electronics LLC

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

H3CRFAC100240 Datasheet, PDF (14/23 Pages) Omron Electronics LLC – Solid-state Twin Timers

◁

H3CR-H

â Accessories (Order Separately)

Flush Mounting Adapter

Name/specifications

Mounting Track

End Plate

Spacer

Protective Cover

Track Mounting/

Front Connecting Socket

Back Connecting Socket

Hold-down Clip (See note 2)

50 cm (l) Ã 7.3 mm (t)

1 m (l) Ã 7.3 mm (t)

1 m (l) Ã 16 mm (t)

8-pin

8-pin, finger safe type

11-pin

11-pin, finger safe type

8-pin

8-pin, finger safe type

11-pin

11-pin, finger safe type

For PL08 and PL11 Sockets

For PF085A Socket

Models

Y92F-30

Y92F-70

Y92F-71

PFP-50N

PFP-100N

PFP-100N2

PFP-M

PFP-S

Y92A-48B

P2CF-08

P2CF-08-E

P2CF-11

P2CF-11-E

P3G-08

P3G-08 with Y92A-48G (See note 1)

P3GA-11

P3GA-11 with Y92A-48G (See note 1)

Y92H-1

Y92H-2

Note: 1. Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 or P3GA-11 Socket.

2. Hold-down Clips are sold in sets of two.

Specifications

â General

Item

Operating/Reset method

Pin type

Input type

Output type

Mounting method

Approved standards

H3CR-H8L

H3CR-H8RL

H3CR-HRL

Instantaneous operation/Time-limit Instantaneous operation/Time-limit reset/Forced reset

reset

8-pin

11-pin

---

No-voltage

Relay output (DPDT)

Relay output (SPDT)

Relay output (DPDT)

DIN track mounting, surface mounting, and flush mounting

UL508, CSA C22.2 No.14, NK, Lloyds

Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2.

Output category according to EN60947-5-1.

â Time Ranges

Time unit

Setting

0.6

1.2

Min. power ON time

Time-up operation repeat period

Forced-reset repeat period

0.05 to 0.6

0.12 to 1.2

0.6 to 6

1.2 to 12

0.1 s min.

3 s min.

S-series

s (sec)

M-series

min (min)

2 s min.

Note: 1. If the above minimum power ON time is not secured, the H3CR may not operate. Be sure to secure the above minimum power ON time.

2. Do not use the Timer with a repeat period of less than 3 s. Doing so may result in abnormal heating or burning. Refer to Safety Precautions

(H3CR-H) on page 8 for details.

http://www.ia.omron.com/

▷