|
W712 Datasheet, PDF (3/17 Pages) OKI electronic componets – Universal Serial Bus Controller 0.5uM Technology Mega Macrofunction | |||
|
◁ |
W712 USB Device Controller
0.5µm Technology Mega Macrofunction
DESCRIPTION
The Universal Serial Bus (USB) Device Controller Mega Macrofunction is a featured element in Okiâs
0.5µm Sea of Gates (SOG) and Customer Structured Array (CSA) families. Oki's USB mega macrofunction
provides a USB interface, control/status block, FIFO control, and application interface in two highly inte-
grated submodules for system design interfaces based on the USB protocol. The submodule partitioning
allows custom configurations to be easily developed. The USB mega macrofunction connects an industry
standard USB interface with a microprocessor-style parallel application interface. This straightforward
interface permits easy integration of the USB mega macrofunction to the target application. Using Okiâs
USB mega macrofunction, designers can reduce development time, risk, and introduce their USB based
products to market faster. Okiâs W712 USB Device Controller mega macrofunction provides a complete
USB device interface solution and is fully compliant with the Universal Serial Bus 1.0 specification. For
more details on the Universal Serial Bus 1.0 specification, refer to www.usb.org.
FEATURES
⢠USB 1.0 compliant
⢠Full-speed (12 Mb/sec) and low-speed (1.5 Mb/sec)
support
⢠Microprocessor-style parallel application interface
⢠Supports isochronous, control, interrupt and bulk
transfers
⢠Supports four transmit FIFOâs
- Three 64 byte
- One 2 Kbyte (2-level)
⢠Supports four receive FIFOâs
- Three 64 byte
- One 2 Kbyte (2-level)
⢠Supports one control endpoint and six
additional endpoint addresses
⢠Expandable up to 32 endpoint addresses
⢠Customizable to specific application
requirements
Supported ASIC Families
Family Name
MSM13R0000
MSM98R000
Family Type
Sea of Gates
Customer Structured Array
Oki Semiconductor
1
|
▷ |