SA58637 Datasheet, PDF (6/22 Pages) NXP Semiconductors – 2 X 2.2 W BTL audio amplifier

NXP Semiconductors
SA58637
2 × 2.2 W BTL audio amplifier
Table 4. Control pins MODE and SELECT versus status of output channels …continued
Voltage levels at control pins at V_CC = 5 V; for other voltage levels see Figure 6 and Figure 7.
Control pin
Status of output channel
Typical I_q (mA)
MODE
SELECT
Left channel
Right channel
HVCC^[4]/LOW^[5] HIGH^[1]
mute/on
standby
8
HVCC^[4]/LOW^[5] HVCC^[4]/n.c.^[2]
mute/on
mute/on
15
HVCC^[4]/LOW^[5] LOW^[5]
standby
mute/on
8
[1] HIGH = V_SELECT > V_CC − 0.5 V.
[2] n.c. = not connected or floating.
[3] X = don’t care.
[4] HVCC = 1.5 V < V_SELECT < V_CC − 1.5 V.
[5] LOW = V_SELECT < 0.5 V.
9. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
V_CC
supply voltage
V_I
input voltage
operating
−0.3
−0.3
I_ORM
repetitive peak output current
-
T_stg
storage temperature
non-operating
−55
T_amb
ambient temperature
operating
−40
V_CC(sc) supply voltage (short circuit)
-
P_tot
total power dissipation
-
Max
Unit
+18
V
V_CC + 0.3 V
1
A
+150
°C
+85
°C
10
V
2.2
W
10. Thermal characteristics
Table 6.
Symbol
R_th(j-a)
Thermal characteristics
Parameter
thermal resistance from
junction to ambient
R_th(j-sp)
thermal resistance from
junction to solder point
Conditions
in free air
with heat spreader
Typ
80
[1] ₂₂
3
Unit
K/W
K/W
K/W
[1] Thermal resistance is 22 K/W with DAP soldered to 64.5 mm² (10 in²), 28.3 g (1 oz) copper heat spreader.
11. Static characteristics
Table 7. Static characteristics
V_CC = 6 V; T_amb = 25 °C; R_L = 8 Ω; V_MODE = 0 V; measured in test circuit Figure 3; unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ Max
Unit
V_CC
supply voltage
I_q
quiescent current
I_stb
standby current
operating
R_L = ∞ Ω
V_MODE = V_CC
2.2
9
18
V
[1] _-
15
22
mA
-
-
10
µA
SA58637_1
Product data sheet
Rev. 01 — 25 February 2008
© NXP B.V. 2008. All rights reserved.
6 of 22