BTA201W Datasheet, PDF (2/13 Pages) NXP Semiconductors – 1 A Three-quadrant triacs high commutation

NXP Semiconductors
BTA201W series E
1 A Three-quadrant triacs high commutation
3. Ordering information
Table 2. Ordering information
Type number Package
Name
Description
BTA201W-600E SC-73
plastic surface-mounted package with increased heatsink; 4 leads
BTA201W-800E
4. Limiting values
Version
SOT223
Table 3. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
V_DRM
repetitive peak off-state voltage
BTA201W-600E
BTA201W-800E
I_T(RMS)
RMS on-state current
full sine wave; T_sp ≤ 106 °C;
see Figure 4 and 5
I_TSM
non-repetitive peak on-state current full sine wave; T_j = 25 °C prior to
surge; see Figure 2 and 3
t = 20 ms
t = 16.7 ms
I²t
I²t for fusing
t = 10 ms
dI_T/dt
I_GM
P_GM
P_G(AV)
T_stg
T_j
rate of rise of on-state current
peak gate current
peak gate power
average gate power
storage temperature
junction temperature
I_TM = 1.5 A; I_G = 0.2 A;
dI_G/dt = 0.2 A/µs
over any 20 ms period
Min
[1] _-
-
-
-
-
-
-
-
-
-
−40
-
Max Unit
600
V
800
V
1
A
12.5 A
13.7 A
0.78
A²s
100
A/µs
2
A
5
W
0.1
W
+150 °C
125
°C
[1] Although not recommended, off-state voltages up to 800 V may be applied without damage, but the triac may switch to the on-state. The
rate of rise of current should not exceed 6 A/µs.
BTA201W_SER_E_2
Product data sheet
Rev. 02 — 17 September 2007
© NXP B.V. 2007. All rights reserved.
2 of 13