 English |
|
|
|
|
|
|
|
| JN5148-001M03T534 Datasheet, PDF (13/23 Pages) NXP Semiconductors – JenNet, ZigBee PRO and IEEE802.15.4 Module | |||
| |||
| ◁ |
A.2 Module PCB Footprint
All dimensions are in mm.
Note: All modules have the same footprint.
Figure 5 Module PCB footprint
RF note for âM00 modules with integral antenna: No components, ground plane or tracks on any layer of the
mother board should be placed within 20mm of the 3 free sides of the antenna. Tracks etc may be placed
adjacent to the can, but should not extend past the can towards the antenna end of the module for 20mm
from the antenna.
© NXP Laboratories UK 2010
JN-DS-JN5148-001-Myy 1v4
13
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese