JN5148-001M03T534 Datasheet, PDF (1/23 Pages) NXP Semiconductors – JenNet, ZigBee PRO and IEEE802.15.4 Module

Data Sheet: JN5148-001-Myy
JenNet, ZigBee PRO and IEEE802.15.4 Module
Overview
The JN5148-001-Myy family is a range of ultra low power, high performance surface
mount modules targeted at JenNet and ZigBee PRO networking applications,
enabling users to realise products with minimum time to market and at the lowest
cost. They remove the need for expensive and lengthy development of custom RF
board designs and test suites. The modules use Jennic’s JN5148 wireless
microcontroller to provide a comprehensive solution with large memory, high CPU
and radio performance and all RF components included. All that is required to
develop and manufacture wireless control or sensing products is to connect a power
supply and peripherals such as switches, actuators and sensors, considerably
simplifying product development.
Three module variants are available: JN5148-001-M00 with an integrated antenna,
JN5148-001-M03 with an antenna connector and the JN5148-001-M04 with an
antenna connector, power amplifier and LNA for extended range. The modules can
implement networking stacks such as JenNet and ZigBee PRO, as well as customer
applications
Module Block Diagram
External
Antenna
Matching
Integrated Antenna
M00 Option
uFl
Connector
Matching
M03 Option
uFl
Connector
PA / LNA Matching
M04 Option
2.4GHz
Radio
Watchdog timer
Power
Management
XTAL
JN5148 chip
Time of Flight
Engine
RAM ROM
128kB 128kB
O-QPSK
Modem
IEEE802.15.4
MAC
Accelerator
128-bit AES
Encryption
Accelerator
RISC CPU
32-byte
OTP eFuse
512kB Serial
Flash Memory
SPI
2-wire serial
Timers
UARTs
4-Wire Audio
Sleep Counters
12-bit ADC,
comparators
12-bit DACs,
temp sensor
Power
Benefits
• Microminiature module solutions
• Ready to use in products
• Minimises product development
time
• No RF test required for systems
• Compliant with FCC part 15
rules, IC Canada RSS 210e,
ETSI EN 300-328 and Japan
ARIB STD-T66
Applications
• Robust and secure low power
wireless applications
• ZigBee PRO and JenNet
networks
• Home and commercial building
automation
• Utilities metering (e.g. AMR)
• Location Aware services (e.g.
Asset Tracking)
• Toys and gaming peripherals
• Industrial systems
• Telemetry
• Remote Control
Features: Module
• 2.4GHz IEEE802.15.4, JenNet and
ZigBee PRO compatible
• Sleep current (with active sleep
timer) 2.6µA
• JN5148-001-M00/03
up to 1km range (Ext antenna)
M00: integral antenna 18x32mm
M03: uFl connector 18x30mm
o TX power +2.5dBm
o Receiver sensitivity –95dBm
o TX current 15mA
o RX current 17.5mA
o 2.3-3.6V operation
• JN5148-001-M04
up to 4km range (Ext Antenna)
o 20dBm TX power
o Receiver sensitivity -98dBm
o uFl connector
o TX current 110mA
o RX current 23mA
o 18x41mm
o 2.7-3.6V operation
Features: Microcontroller
• 32-bit RISC CPU, up to 32MIPs with
low power
• 128kB ROM stores system code
• 128kB RAM stores system data and
bootloaded program code
• 4Mbit serial flash for program code
and data
• On chip OTP efuse
• JTAG debug interface
• 4-input 12-bit ADC, 2 12-bit DACs, 2
comparators
• 3 application timer/counters,
3 system timers
• 2 UARTs
• SPI port with 5 selects
• 2-wire serial interface
• 4-wire digital audio interface
• Watchdog timer
• Up to 21 DIO
Industrial temp (-40°C to +85°C)
Lead-free and RoHS compliant
JN-DS-JN5148-001-Myy 1v4
© NXP Laboratories UK 2010