MK80FN256VLL15 Datasheet, PDF (1/95 Pages) NXP Semiconductors – High performance ARM® Cortex®-M4F MCU with up to 256KB of Flash, 256KB of SRAM, Full Speed USB connectivity, and QuadSPI for interfacing to Serial NOR flash

Freescale Semiconductor, Inc.
Data Sheet: Technical Data
K80P121M150SF5
Rev. 4, 09/2015
Kinetis K80 Sub-Family
High performance ARM® Cortex®-M4F MCU with up to
256KB of Flash, 256KB of SRAM, Full Speed USB
connectivity, and QuadSPI for interfacing to Serial NOR
flash
The K80 sub-family extends Kinetis products with new features
including QuadSPI serial flash interface and separate voltage
domain for a sub-set of IO pins. The QuadSPI interface supports
connections to Non-Volatile Memory for data or code. The
extended memory resources allow developers to enhance their
embedded applications with greater capability and features.
Software compatibility with previous Kinetis devices ensures
quick transitions from other Kinetis subfamilies. Enhancements
include High Speed RUN for greater performance, and smart
Peripherals like LPUART which can operate in STOP modes.
MK80FN256VLL15
MK80FN256VDC15
MK80FN256VLQ15
MK80FN256CAx15
121 XFBGA (DC)
8 x 8 x 0.5 mm Pitch
0.65 mm
100 LQFP (LL)
14 x 14 x 1.7 Pitch
0.5mm
144 LQFP (LQ)
20 x 20 x 1.6 Pitch 0.5
mm
121 WLCSP (Ax)
4.64 mm x 4.53 mm
Performance
Analog modules
• Up to 150 MHz ARM Cortex-M4 based core with DSP
• One 16-bit SAR ADCs, two 6-bit DAC and one
instructions and Single Precision Floating Point unit
12-bit DAC
• Two analog comparators (CMP) containing a
Memories and memory expansion
6-bit DAC and programmable reference input
• Up to 256 KB program flash with 256 KB RAM
• Voltage reference 1.2V
• FlexBus external bus interface and SDRAM controller
• Dual QuadSPI with XIP
Operating Characteristics
• 32 KB Boot ROM with built in bootloader
• Main VDD Voltage and Flash write voltage
• Supports SDR and DDR serial flash and octal configurations
range:1.71V–3.6 V
• Temperature range (ambient): -40 to 105°C
System and Clocks
• Multiple low-power modes
• Independent V_DDIO for PORTE (QuadSPI):
1.71V–3.6 V
• Memory protection unit with multi-master protection
• 3 to 32 MHz main crystal oscillator
Communication interfaces
• 32 kHz low power crystal oscillator
• USB full-/low-speed On-the-Go controller
• 48 MHz internal reference
• Secure Digital Host Controller (SDHC) and
FlexIO
Timers
• One I2S module, three SPI, four I2C modules
• One 4 ch-Periodic interrupt timer
and five LPUART modules
• Two 16-bit low-power timer PWM modules
• Two 8-ch motor control/general purpose/PWM timers
Security
• Two 2-ch quadrature decoder/general purpose timers
• Hardware random-number generator
• Real-time clock with independent 3.3V power domain
• Supports DES, AES, SHA accelerator (CAU)
• Programmable delay block
• Multiple levels of embedded flash security
Human-machine interface
• Low-power hardware touch sensor interface (TSI)
• General-purpose input/output
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2015 Freescale Semiconductor,
Inc. All rights reserved.