LPC2109_11 Datasheet, PDF (1/46 Pages) NXP Semiconductors – Single-chip 16/32-bit microcontrollers; 64/128/256 kB ISP/IAP flash with 10-bit ADC and CAN

LPC2109/2119/2129
Single-chip 16/32-bit microcontrollers; 64/128/256 kB ISP/IAP
flash with 10-bit ADC and CAN
Rev. 7 — 14 June 2011
Product data sheet
1. General description
The LPC2109/2119/2129 are based on a 16/32-bit ARM7TDMI-S CPU with real-time
emulation and embedded trace support, together with 64/128/256 kB of embedded
high-speed flash memory. A 128-bit wide memory interface and a unique accelerator
architecture enable 32-bit code execution at maximum clock rate. For critical code size
applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with
minimal performance penalty.
With their compact 64-pin package, low power consumption, various 32-bit timers,
4-channel 10-bit ADC, two advanced CAN channels, PWM channels and 46 fast GPIO
lines with up to nine external interrupt pins these microcontrollers are particularly suitable
for automotive and industrial control applications, as well as medical systems and
fault-tolerant maintenance buses. With a wide range of additional serial communications
interfaces, they are also suited for communication gateways and protocol converters as
well as many other general-purpose applications.
Remark: Throughout the data sheet, the term LPC2109/2119/2129 will apply to devices
with and without the /00 or /01 suffixes. The /00 or the /01 suffix will be used to
differentiate from other devices only when necessary.
2. Features and benefits
2.1 Key features brought by LPC2109/2119/2129/01 devices
 Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original device.
They also allow for a port pin to be read at any time regardless of its function.
 Dedicated result registers for ADC(s) reduce interrupt overhead. The ADC pads are
5 V tolerant when configured for digital I/O function(s).
 UART0/1 include fractional baud rate generator, auto-bauding capabilities and
handshake flow-control fully implemented in hardware.
 Buffered SSP serial controller supporting SPI, 4-wire SSI, and Microwire formats.
 SPI programmable data length and master mode enhancement.
 Diversified Code Read Protection (CRP) enables different security levels to be
implemented. This feature is available in LPC2109/2119/2129/00 devices as well.
 General purpose timers can operate as external event counters.
2.2 Key features common for all devices
 16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.
 8/16 kB on-chip SRAM.