NAND08GAH0A Datasheet, PDF (88/116 Pages) Numonyx B.V – 1 Gbyte, 2 Gbyte, 1.8 V/3 V supply, NAND Flash memories with MultiMediaCard™ interface

Serial peripheral interface (SPI) mode
NAND08GAH0A, NAND16GAH0D
If the host sends a STOP_TRANSMISSION command after the device transmitted the last
block of a Multiple Block Read with a pre-defined number of blocks, it is responded to as for
an illegal command.
If the host uses partial blocks whose accumulated length is not block aligned, and block
misalignment is not allowed, the device detects a block misalignment error condition during
the transmission of the first misaligned block and the content of the further transferred bits is
undefined. As the host sends CMD12, the device responds with the ADDRESS_MISALIGN
bit set.
Figure 31. SPI Read operation – data error
from host from card data error token
to card to host from card to host
next
command
Data in
command
command
Data out
response
data error
ai08347b
88/116