DS90C031 Datasheet, PDF (7/14 Pages) National Semiconductor (TI) – LVDS Quad CMOS Differential Line Driver

Applications Information (Continued)
The footprint of the DS90C031 is the same as the industry
standard 26LS31 Quad Differential (RS-422) Driver.
FIGURE 7. Driver Output Levels
DS011946-9
Pin Descriptions
Pin No.
(SOIC)
1, 7,
9, 15
2, 6,
10, 14
3, 5,
11, 13
4
12
Name
Description
D_IN
D_OUT+
D_OUT−
EN
EN*
Driver input pin, TTL/CMOS
compatible
Non-inverting driver output pin,
LVDS levels
Inverting driver output pin,
LVDS levels
Active high enable pin, OR-ed
with EN*
Active low enable pin, OR-ed
with EN
Pin No.
(SOIC)
16
8
Name
Description
V_CC
GND
Power supply pin, +5V ± 10%
Ground pin
Ordering Information
Operating
Temperature
−40˚C to +85˚C
−55˚C to +125˚C
DS90C031E-QML
5962-95833
Package Type/
Number
SOP/M16A
LCC/E20A
(NSID)
(SMD)
Order Number
DS90C031TM
DS90C031E-QML
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation.
Note 2: Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground except: V_OD1 and
∆V_OD1.
Note 3: All typicals are given for: V_CC = +5.0V, T_A = +25˚C.
Note 4: Channel-to-Channel Skew is defined as the difference between the propagation delay of the channel and the other channels in the same chip with an event
on the inputs.
Note 5: Chip to Chip Skew is defined as the difference between the minimum and maximum specified differential propagation delays.
Note 6: Generator waveform for all tests unless otherwise specified: f = 1 MHz, Z_O = 50Ω, t_r ≤ 6 ns, and t_f ≤ 6 ns.
Note 7: ESD Ratings:
HBM (1.5 kΩ, 100 pF) ≥ 3,500V
EIAJ (0Ω, 200 pF) ≥ 250V
Note 8: Output short circuit current (I_OS) is specified as magnitude only, minus sign indicates direction only.
Note 9: C_L includes probe and jig capacitance.
Note 10: Guaranteed by characterization data (DS90C031E).
7
www.national.com