COP884BC Datasheet, PDF(53/57 Page) National Semiconductor (TI) – 8-Bit CMOS ROM Based Microcontrollers with 2k Memory, Comparators, and CAN Interface

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

COP884BC Datasheet, PDF (53/57 Pages) National Semiconductor (TI) – 8-Bit CMOS ROM Based Microcontrollers with 2k Memory, Comparators, and CAN Interface

◁

Mask Options

The COP684BC and COP884BC mask programmable op-

tions are shown below. The options are programmed at the

same time as the ROM pattern submission.

OPTION 1: CLOCK CONFIGURATION

=1 Crystal Oscillator (CKI/10)

G7 (CKO) is clock generator output to

crystal/resonator

CKI is the clock input

OPTION 2: HALT

=1 Enable HALT mode

=2 Disable HALT mode

OPTION 3: BOND OUT

=1 28-Pin SO

=2 20-Pin SO

OPTION 4: ON-CHIP POWER-ON RESET

=1 Enable ON-CHIP POWER-ON RESET

=2 Disable ON-CHIP POWER-ON RESET

The chip can be driven by a clock input on the CKI input pin

which can be between DC and 10 MHz provided G7/CKO is

driven with the inverse signal. The CKI input frequency is di-

vided down by 10 to produce the instruction cycle clock (1/

tc).

Development Tools Support

OVERVIEW

National is engaged with an international community of inde-

pendent 3rd party vendors who provide hardware and soft-

ware development tool support. Through Nationalâs interac-

tion and guidance, these tools cooperate to form a choice of

solutions that fits each developerâs needs.

This section provides a summary of the tool and develop-

ment kits currently available. Up-to-date information, selec-

tion guides, free tools, demos, updates, and purchase infor-

mation can be obtained at our web site at:

www.national.com/cop8.

SUMMARY OF TOOLS

COP8 Evaluation Tools

â¢ COP8âNSEVAL: Free Software Evaluation package for

Windows. A fully integrated evaluation environment for

COP8, including versions of WCOP8 IDE (Integrated De-

velopment Environment), COP8-NSASM, COP8-MLSIM,

COP8C, DriveWayâ¢ COP8, Manuals, and other COP8

information.

â¢ COP8âMLSIM: Free Instruction Level Simulator tool for

Windows. For testing and debugging software instruc-

tions only (No I/O or interrupt support).

â¢ COP8âEPU: Very Low cost COP8 Evaluation & Pro-

gramming Unit. Windows based evaluation and

hardware-simulation tool, with COP8 device programmer

and erasable samples. Includes COP8-NSDEV, Drive-

way COP8 Demo, MetaLink Debugger, I/O cables and

power supply.

â¢ COP8âEVAL-ICUxx: Very Low cost evaluation and de-

sign test board for COP8ACC and COP8SGx Families,

from ICU. Real-time environment with add-on A/D, D/A,

and EEPROM. Includes software routines and reference

designs.

â¢ Manuals, Applications Notes, Literature: Available free

from our web site at: www.national.com/cop8.

COP8 Integrated Software/Hardware Design Develop-

ment Kits

â¢ COP8-EPU: Very Low cost Evaluation & Programming

Unit. Windows based development and hardware-

simulation tool for COPSx/xG families, with COP8 device

programmer and samples. Includes COP8-NSDEV,

Driveway COP8 Demo, MetaLink Debugger, cables and

power supply.

â¢ COP8-DM: Moderate cost Debug Module from MetaLink.

A Windows based, real-time in-circuit emulation tool with

COP8 device programmer. Includes COP8-NSDEV,

DriveWay COP8 Demo, MetaLink Debugger, power sup-

ply, emulation cables and adapters.

COP8 Development Languages and Environments

â¢ COP8-NSASM: Free COP8 Assembler v5 for Win32.

Macro assembler, linker, and librarian for COP8 software

development. Supports all COP8 devices. (DOS/Win16

v4.10.2 available with limited support). (Compatible with

WCOP8 IDE, COP8C, and DriveWay COP8).

â¢ COP8-NSDEV: Very low cost Software Development

Package for Windows. An integrated development envi-

ronment for COP8, including WCOP8 IDE, COP8-

NSASM, COP8-MLSIM.

â¢ COP8C: Moderately priced C Cross-Compiler and Code

Development System from Byte Craft (no code limit). In-

cludes BCLIDE (Byte Craft Limited Integrated Develop-

ment Environment) for Win32, editor, optimizing C Cross-

Compiler, macro cross assembler, BC-Linker, and

MetaLink tools support. (DOS/SUN versions available;

Compiler is installable under WCOP8 IDE; Compatible

with DriveWay COP8).

â¢ EWCOP8-KS: Very Low cost ANSI C-Compiler and Em-

bedded Workbench from IAR (Kickstart version:

COP8Sx/Fx only with 2k code limit; No FP). A fully inte-

grated Win32 IDE, ANSI C-Compiler, macro assembler,

editor, linker, Liberian, C-Spy simulator/debugger, PLUS

MetaLink EPU/DM emulator support.

â¢ EWCOP8-AS: Moderately priced COP8 Assembler and

Embedded Workbench from IAR (no code limit). A fully in-

tegrated Win32 IDE, macro assembler, editor, linker, li-

brarian, and C-Spy high-level simulator/debugger with

I/O and interrupts support. (Upgradeable with optional

C-Compiler and/or MetaLink Debugger/Emulator sup-

port).

â¢ EWCOP8-BL: Moderately priced ANSI C-Compiler and

Embedded Workbench from IAR (Baseline version: All

COP8 devices; 4k code limit; no FP). A fully integrated

Win32 IDE, ANSI C-Compiler, macro assembler, editor,

linker, librarian, and C-Spy high-level simulator/debugger.

(Upgradeable; CWCOP8-M MetaLink tools interface sup-

port optional).

â¢ EWCOP8: Full featured ANSI C-Compiler and Embed-

ded Workbench for Windows from IAR (no code limit). A

fully integrated Win32 IDE, ANSI C-Compiler, macro as-

sembler, editor, linker, librarian, and C-Spy high-level

simulator/debugger. (CWCOP8-M MetaLink tools inter-

face support optional).

www.national.com

▷