|
LP3941A Datasheet, PDF (5/32 Pages) National Semiconductor (TI) – Cellular Phone Power Management Unit | |||
|
◁ |
Absolute Maximum Ratings (Notes 1,
2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
CHG-IN
IN1â6, BATT, SDA, SCL, ON,
HF-PWR, PS-HOLD, SYS,
COMP1_IN, COMP2_IN,
CHG_IN, BSNS, VO5-EN,
VO6-EN, LED1â3,
RTC_ALARM, BU_BAT, VRTC,
RESET, BATTSENSE.
REFBYP, ON, PS-HOLD,
COMP1_OUT, COMP2_OUT
to GND
VO1 to GND
VO2, VO3 to GND
VO4, VO5 to GND
VO6, VO7 to GND
VO8, VO9 to GND
VO10, VO11 to GND
GND to GND SLUG
â0.3V to +12V
â0.3V to +6V
â0.3V to +VBAT + 0.3V
â0.3V to +VIN1 + 0.3V
â0.3V to +VIN2 + 0.3V
â0.3V to +VIN3 + 0.3V
â0.3V to +VIN4 + 0.3V
â0.3V to +VIN5 + 0.3V
â0.3V to +VIN6 + 0.3V
±0.3V
Maximum Continuous Power Dissipation
(PD_MAX) (Note 3)
Junction Temperature (TJ-MAX)
Storage Temperature Range
3.07W
150ËC
â65ËC to +150ËC
Maximum Lead Temperature
(Soldering)
(Note 4)
ESD Ratings (Note 5)
All Pins
2 kV HBM
200V MM
Operating Ratings (Notes 1, 2)
VIN
VEN
Junction Temperature (TJ) Range
Ambient Temperature (TA) Range
(Note 6)
3.0V to 6.0V
0V to (VIN + 0.3V)
â40ËC to +125ËC
â40ËC to +85ËC
Thermal Properties (Note 7)
Junction-to-Ambient Thermal
Resistance (θJA)
26ËC/W
Electrical Characteristics
Unless otherwise noted, VIN = 2.5V to 5.5V, CIN (IN1â6) = 4.7 µF, COUT (VO1 and VO9) = 4.7 µF, COUT (VO2, VO3, VO7, VO8,
VO10 and VO11) = 2.2 µF, COUT (VO4 to VO6) = 1 µF, COUT (VRTC) = 1 µF ceramic, CBYP = 0.1 µF. Typical values and limits
appearing in normal type apply for TJ = 25ËC. Limits appearing in boldface type apply over the entire junction temperature
range for operation, â40 to +125ËC. (Notes 2, 8, 9, 10)
Symbol
Parameter
Condition
Min
Typ
Max
Units
IQ
Shutdown Supply Current
VBATT = 2.1V, UVLO on, internal
logic generator on, VRTC off, all other
14
µA
circuits off.
No Load Supply Current, LDO VBATT = 3.6V, LDOs VO1, VO3 and
1 & 3 & 5 on
VO5 on, back-up battery charger and
310
µA
VRTC on, charger disconnected,
comparator 1 & 2 on.
No Load Supply Current
VBATT = 3.6V, All LDOs on, charger
500
µA
disconnected.
BATTERY UNDER VOLTAGE LOCKOUT
VUVLO-R Under Voltage Lock-Out
VUVLO-F Under Voltage Lock-Out
VTH-POR Power-On Reset Threshold
THERMAL SHUTDOWN
VBATT Rising
VBATT Falling
VBATT Falling Edge
2.91
3.1
3.32
V
2.15
2.49
2.85
V
1
1.7
2.3
V
Threshold
Hysteresis
160
ËC
10
OUTPUT CAPACITORS
COUT
Capacitance
ESR
1
20
µF
5
500
mâ¦
LOGIC AND CONTROL INPUTS
VIL
Input Low Level
PS-HOLD, ON, BSNS, HF-PWR,
RTC_ALARM, SDA, SCL, VO5-EN,
VO6-EN.
2.5V ⤠VBATT ⤠5.5V
0.4
V
5
www.national.com
|
▷ |