DS99R124Q Datasheet, PDF (4/24 Pages) National Semiconductor (TI) – 5 - 43 MHz 18-bit Color FPD-Link II to FPD-Link Converter

Pin Name
ID[x]
Pin #
16
I/O, Type
I, Analog
Power and Ground
VDDL
6, 31
VDDA
38, 43
VDDP
8, 46, 47
VDDTX
13
VDDIO
25
GND
9, 14, 26,
32, 39, 44,
45, 48
DAP
DAP
Power
Power
Power
Power
Power
Ground
Ground
Description
Serial Control Bus Device ID Address Select — Optional
Resistor to Ground and 10 kΩ pull-up to 1.8V rail. See Table 5.
Logic Power, 1.8 V ±5%
Analog Power, 1.8 V ±5%
SSC Generator Power, 1.8 V ±5%
FPD-Link Power, 3.3 V ±10%
LVCMOS I/O Power, 1.8 V ±5% OR 3.3 V ±10%
Ground
DAP is the large metal contact at the bottom side, located at the center of the LLP package.
Connected to the ground plane (GND) with at least 9 vias.
NOTE: 1 = HIGH, 0 = LOW
Ordering Information
NSID
Package Description
Quantity
SPEC Package ID
DS99R124QSQE
48–pin LLP, 7.0 X 7.0 X 0.8 mm, 0.5 mm pitch
250
NOPB
SQA48A
DS99R124QSQ
48–pin LLP, 7.0 X 7.0 X 0.8 mm, 0.5 mm pitch
1000
NOPB
SQA48A
DS99R124QSQX
48–pin LLP, 7.0 X 7.0 X 0.8 mm, 0.5 mm pitch
2500
NOPB
SQA48A
Note: Automotive Grade (Q) product incorporates enhanced manufacturing and support processes for the automotive market,
including defect detection methodologies. Reliability qualification is compliant with the requirements and temperature grades
defined in the AEC Q100 standard. Automotive Grade products are identified with the letter Q. For more information go to
http://www.national.com/automotive.
Block Diagram
www.national.com
FPD-Link II to FPD-Link Convertor
30105229
4