|
LMC7111 Datasheet, PDF (3/18 Pages) National Semiconductor (TI) – Tiny CMOS Operational Amplifier with Rail-to-Rail Input | |||
|
◁ |
2.7V DC Electrical Characteristics (Continued)
Unless otherwise specified, all limits guaranteed for TJ = 25ËC, V+ = 2.7V, Vâ = 0V, VCM = VO = V+/2 and RL > 1 Mâ¦. Bold-
face limits apply at the temperature extremes.
Symbol
Parameter
AVOL
Voltage Gain
IS
Supply Current
Conditions
Sourcing
Sinking
V+ = +2.7V,
VO = V+/2
Typ
(Note 5)
400
150
20
LMC7111AI
Limit
(Note 6)
LMC7111BI
Limit
(Note 6)
45
50
60
65
Units
V/mv
min
V/mv
min
µA
max
2.7V AC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for TJ = 25ËC, V+ = 2.7V, Vâ = 0V, VCM = VO = V+/2 and RL > 1 Mâ¦. Bold-
face limits apply at the temperature extremes.
Symbol
Parameter
SR
GBW
Slew Rate
Gain-Bandwidth Product
Conditions
(Note 8)
Typ
(Note 5)
0.015
40
LMC7111AI
Limit
(Note 6)
LMC7111BI
Limit
(Note 6)
Units
V/µs
kHz
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-
tended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
Note 2: Human body model, 1.5 k⦠in series with 100 pF.
Note 3: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature at 150ËC.
Note 4: The maximum power dissipation is a function of TJ(max), θJA and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)
â TA)/θJA. All numbers apply for packages soldered directly into a PC board.
Note 5: Typical Values represent the most likely parametric norm.
Note 6: All limits are guaranteed by testing or statistical analysis.
Note 7: V+ = 2.7V, VCM = 1.35V and RL connected to 1.35V. For Sourcing tests, 1.35V ⤠VO ⤠2.7V. For Sinking tests, 0.5V ⤠VO ⤠1.35V.
Note 8: Connected as Voltage Follower with 1.0V step input. Number specified is the slower of the positive and negative slew rates. Input referred, V+ = 2.7V and
RL = 100 k⦠connected to 1.35V. Amp excited with 1 kHz to produce VO = 1 VPP.
Note 9: Bias Current guaranteed by design and processing.
3V DC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for TJ = 25ËC, V+ = 3V, Vâ = 0V, VCM = VO = V+/2 and RL > 1 Mâ¦. Bold-
face limits apply at the temperature extremes.
Typ
LMC7111AI
LMC7111BI
Symbol
Parameter
Conditions
(Note 5)
Limit
Limit
Units
(Note 6)
(Note 6)
VCM
Input Common-Mode
V+ = 3V
â0.25
0.0
0.0
V
Voltage Range
For CMRR ⥠50 dB
min
3.2
3.0
3.0
V
2.8
2.8
max
3
www.national.com
|
▷ |