DS90C365A_05 Datasheet, PDF (3/12 Pages) National Semiconductor (TI) – +3.3V programmable LVDS Transmitter 18-Bit Flat Panel Display Link-87.5 MHz

Electrical Characteristics (Continued)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
TRANSMITTER SUPPLY CURRENT
ICCTG Transmitter Supply Current
16 Grayscale
ICCTZ
Transmitter Supply Current
Power Down
R_L = 100Ω,
C_L = 5 pF,
16 Grayscale Pattern
(Figures 2, 3 ) " Typ "
f = 25 MHz
f = 40 MHz
values are given for
V_CC = 3.6V and T_A =
+25˚C, " Max " values
are given for V_CC =
3.6V and T_A = −10˚C
f = 65 MHz
f = 87.5 MHz
Power Down = Low
Driver Outputs in TRI-STATE under
Power Down Mode
Min Typ Max Units
28
40
mA
32
45
mA
39
50
mA
44
56
mA
11 150
µA
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the device
should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
Note 2: Typical values are given for V_CC = 3.3V and T_A = +25˚C unless specified otherwise.
Note 3: Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground unless otherwise
specified (except V_OD and ∆V_OD).
Note 4: V_OS previously referred as V_CM.
Recommended Transmitter Input Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified
Symbol
Parameter
TCIT
TxCLK IN Transition Time (Figure 5)
TCIP
TxCLK IN Period (Figure 6)
TCIH
TxCLK IN High Time (Figure 6)
TCIL
TxCLK IN Low Time (Figure 6)
TXIT
TxIN , and /PD pin Transition Time
TXPD Minimum pulse width for PWR DOWN pin signal.
Min
1.0
11.76
0.35T
0.35T
1.5
1
Typ
T
0.5T
0.5T
Max
6.0
50
0.65T
0.65T
6.0
Units
ns
ns
ns
ns
ns
us
3
www.national.com