LMC6462_14 Datasheet, PDF (11/32 Pages) National Semiconductor (TI) – LMC6462 Dual/LMC6464 Quad Micropower, Rail-to-Rail Input and Output CMOS

LMC6462, LMC6464
www.ti.com
APPLICATION INFORMATION
SNOS725D – MAY 1999 – REVISED MARCH 2013
Input Common-Mode Voltage Range
The LMC6462/4 has a rail-to-rail input common-mode voltage range. Figure 33 shows an input voltage
exceeding both supplies with no resulting phase inversion on the output.
Figure 33. An Input Voltage Signal Exceeds the LMC6462/4 Power Supply Voltage with No Output Phase
Inversion
The absolute maximum input voltage at V⁺ = 3V is 300 mV beyond either supply rail at room temperature.
Voltages greatly exceeding this absolute maximum rating, as in Figure 34, can cause excessive current to flow in
or out of the input pins, possibly affecting reliability. The input current can be externally limited to ±5 mA, with an
input resistor, as shown in Figure 35.
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC6462 LMC6464
Submit Documentation Feedback
11