LMH6733 Datasheet, PDF (1/16 Pages) Texas Instruments – Single Supply, 1.0 GHz, Triple Operational Amplifier

January 2007
LMH6733
Single Supply, 1.0 GHz, Triple Operational Amplifier
General Description
The LMH6733 is a triple, wideband, operational amplifier de-
signed specifically for use where high speed and low power
are required. Input voltage range and output voltage swing
are optimized for operation on supplies as low as 3V and up
to ±6V. Benefiting from National’s current feedback architec-
ture, the LMH6733 offers a gain range of ±1 to ±10 while
providing stable operation without external compensation,
even at unity gain. These amplifiers provide 650 MHz small
signal bandwidth at a gain of 2 V/V , a low 2.1 nV/ input
referred noise and only consume 5.5 mA (per amplifier) from
a single 5V supply.
The LMH6733 is offered in a 16-Pin SSOP package with flow
through pinout for ease of layout and is also pin compatible
with the LMH6738. Each amplifier has an individual shutdown
pin.
Features
■ ^{Supply range 3 to 12V single supply}
■ ^{Supply range ±1.5V to ±6V split supply}
■ ^{1.0 GHz −3 dB small signal bandwidth}
(A_V = +1, V_S = ±5V)
■ ^{650 MHz −3 dB small signal bandwidth}
(A_V = +2, V_S = 5V)
■ ^{Low supply current (5.5 mA per op amp, V}_S ^{= 5V)}
■ ^{2.1 nV/ input noise voltage}
■ ^{3750 V/μs slew rate}
■ ^{70 mA linear output current}
■ ^{CMIR and output swing to 1V from each supply rail}
Applications
■ ^{HDTV component video driver}
■ ^{High resolution projectors}
■ ^{Flash A/D driver}
■ ^{D/A transimpedance buffer}
■ ^{Wide dynamic range IF amp}
■ ^{Radar/communication receivers}
■ ^{DDS post-amps}
■ ^{Wideband inverting summer}
■ ^{Line driver}
Connection Diagram
16-Pin SSOP
Top View
20199110
Ordering Information
Package
16-pin SSOP
Part Number
LMH6733MQ
LMH6733MQX
VIP10™ is a trademark of National Semiconductor Corporation.
Package Marking
LH6733MQ
© 2007 National Semiconductor Corporation 201991
Transport Media
95 Units/Rail
2.5k Units Tape and Reel
NSC Drawing
MQA16
www.national.com