LMC660EP Datasheet, PDF (1/15 Pages) National Semiconductor (TI) – CMOS Quad Operational Amplifier

December 2004
LMC660EP
CMOS Quad Operational Amplifier
General Description
The LMC660EP CMOS Quad operational amplifier is ideal
for operation from a single supply. It operates from +5V to
+15V and features rail-to-rail output swing in addition to an
input common-mode range that includes ground. Perfor-
mance limitations that have plagued CMOS amplifiers in the
past are not a problem with this design. Input V_OS, drift, and
broadband noise as well as voltage gain into realistic loads
(2 kΩ and 600Ω) are all equal to or better than widely
accepted bipolar equivalents.
This chip is built with National’s advanced Double-Poly
Silicon-Gate CMOS process.
See the LMC662 datasheet for a dual CMOS operational
amplifier with these same features.
ENHANCED PLASTIC
• Extended Temperature Performance of −40˚C to +85˚C
• Baseline Control - Single Fab & Assembly Site
• Process Change Notification (PCN)
• Qualification & Reliability Data
• Solder (PbSn) Lead Finish is standard
• Enhanced Diminishing Manufacturing Sources (DMS)
Support
Features
n Rail-to-rail output swing
n Specified for 2 kΩ and 600Ω loads
n High voltage gain: 126 dB
n Low input offset voltage: 3 mV
n Low offset voltage drift: 1.3 µV/˚C
n Ultra low input bias current: 2 fA
n Input common-mode range includes V^−
n Operating range from +5V to +15V supply
n I_SS = 375 µA/amplifier; independent of V⁺
n Low distortion: 0.01% at 10 kHz
n Slew rate: 1.1 V/µs
Applications
n High-impedance buffer or preamplifier
n Precision current-to-voltage converter
n Long-term integrator
n Sample-and-Hold circuit
n Selected Military Applications
n Selected Avionics Applications
Ordering Information
PART NUMBER
LMC660AIMEP
(Notes 1, 2)
VID PART NUMBER
V62/04749-01
TBD
NS PACKAGE NUMBER (Note 3)
M14A
TBD
Note 1: For the following (Enhanced Plastic) version, check for availability: LMC660AIMXEP, LMC660AINEP. Parts listed with an "X" are provided in
Tape & Reel and parts without an "X" are in Rails.
Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: www.national.com/
mil
Note 3: Refer to package details under Physical Dimensions
© 2004 National Semiconductor Corporation DS201145
www.national.com