UPG132G Datasheet, PDF (1/14 Pages) NEC – L-BAND SPDT SWITCH

DATA SHEET
GaAs INTEGRATED CIRCUIT
µPG132G
L-BAND SPDT SWITCH
DESCRIPTION
µPG132G is an L-Band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital cellular
or cordless telephone application.
The device can operate from 100 MHz to 2.5 GHz, having the low insertion loss.
It housed in an original 8 pin SSOP that is smaller than usual 8 pin SOP and easy to install and contributes to
miniaturizing the system.
It can be used in wide-band switching applications.
FEATURES
• Maximum transmission power :
• Low insertion loss
:
• High switching speed
:
• +3 V/0 V control voltage
• Small package
:
0.6 W (typ.)
0.6 dB (typ.) at f = 2 GHz
30 ns
8 pins SSOP
APPLICATION
• Digital cordless telephone : PHS, PCS, DECT etc.
• Digital hand-held cellular phone, WLAN
ORDERING INFORMATION
PART NUMBER
µPG132G-E1
PACKAGE
8 pin plastic SSOP
PACKING FORM
Carrier tape width 12 mm.
QTY 2kp/Reel.
For evaluation sample order, please contact your local NEC sales office.
ABSOLUTE MAXIMUM RATINGS (TA = 25 ˚C)
Control Voltage
VCONT
–0.6 to +6
Input Power
Pin
31
Total Power Dissipation
Ptot
0.4
Operating Case Temperature
Topt
–65 to +90
Storage Temperature
Tstg
–65 to +150
V
dBm
W
˚C
˚C
CAUTION: The IC must be handled with care to prevent static discharge because its circuit is composed
of GaAs MES FET.
Document No. P10732EJ2V0DS00 (2nd edition)
Date Published April 1996 P
Printed in Japan
©
1996