EXB28V Datasheet, PDF (9/10 Pages) Nais(Matsushita Electric Works) – Chip Resistor Array

Subject
Chip Resistor Array PRODUCT SPECIFICATION FOR INFORMATION
Part No.
EXB28V
Spec. No.
151-EXB-28V02DE
9-9
•Resistance to climate
When resistors shall be exposed at 60 °C ± 2 °C, 90 %RH to 95 %RH for 120 hours, no
defection of chip and no break off carrier tape.
When the top tape shall be peeled, tape should not have flash and tear.
3-2. Quantity in Taping: 10,000 pcs. / reel
3-3. Tape packaging
•Resistor side shall be facing upward.
•Chip resistor shall not be sticking to top tape and bottom tape.
•Chip resistors shall be easy to take out from carrier tape and chip hole or sprocket hole shall not
have flash and break.
4. Outer Packaging
Quantity: 20reels(Max.200,000 pcs.)
Tape
Marking
•When packaging quantity does not reach max quantity, the remaining empty space shall be
buried with buffer material.
•When quantity shall be few, alternative packaging methods may used. No problem must occur
during the exportation of the product..
5. Marking
•Side of reel(Marking shall be on one side.)
(1)Part name (2)Part number (3)Quantity (4)Lot number (5)Maker name
•Packaging box
(1)Customer name (2)Part name (3)Part number (4)Customer part number
(5)Quantity (6)Maker name
　
MATSUSHITA ELECTRONIC COMPONENTS Co.,LTD.