CSTCW24M0X53-R0 Datasheet, PDF (2/32 Pages) Murata Manufacturing Co., Ltd. – Ceramic Resonator

P17E.pdf
2012.10.31 ^{Note • Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.}
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Introduction
Ceramic resonators (CERALOCK^®) are made of high
stability piezoelectric ceramics that function as a
mechanical resonator.
This device has been developed to function as a
reference signal generator and the frequency is
primarily adjusted by the size and thickness of the
ceramic element.
With the advance of the IC technology, various
equipment may be controlled by a single LSI integrated
circuit, such as the one-chip microprocessor.
CERALOCK^® can be used as the timing element in most
microprocessor based equipment.
In the future, more and more applications will use
CERALOCK^® because of its high stability non-
adjustment performance, miniature size and cost
savings. Typical applications include TVs, VCRs,
automotive electronic devices, telephones, copiers,
cameras, voice synthesizers, communication equipment,
remote controls and toys.
This manual describes CERALOCK^® and will assist you
in applying it effectively.
* CERALOCK^® is the brand name of these MURATA
products.