 English |
|
|
|
|
|
|
|
| 74HC4052D-T Datasheet, PDF (11/28 Pages) NXP Semiconductors – Dual 4-channel analog multiplexer/demultiplexer | |||
| |||
| ◁ |
NXP Semiconductors
74HC4052; 74HCT4052
Dual 4-channel analog multiplexer/demultiplexer
Table 8. Static characteristics for 74HCT4052 â¦continued
Voltages are referenced to GND (ground = 0 V).
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input.
Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output.
Symbol Parameter
Conditions
VIL
LOW-level input
VCC = 4.5 V to 5.5 V
voltage
II
IS(OFF)
input leakage current
OFF-state leakage
current
VI = VCC or GND; VCC = 5.5 V; VEE = 0 V
VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;
|VSW| = VCC â VEE; see Figure 11
per channel
all channels
IS(ON)
ICC
ON-state leakage
current
supply current
ÎICC
additional supply
current
VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;
|VSW| = VCC â VEE; see Figure 12
VI = VCC or GND; Vis = VEE or VCC;
Vos = VCC or VEE
VCC = 5.5 V; VEE = 0 V
VCC = 5.0 V; VEE = â5.0 V
per input; VI = VCC â 2.1 V; other inputs at VCC
or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V
[1] All typical values are measured at Tamb = 25 °C.
Min Typ Max
Unit
-
-
0.8
V
-
-
±1.0
μA
-
-
±1.0
μA
-
-
±2.0
μA
-
-
±2.0
μA
-
-
160.0 μA
-
-
320.0 μA
-
-
220.5 μA
from select
input
Sn
Isw
Yn
A
VCC
Isw
Z
A
Vis
GND VEE
Vos
Vis = VCC and Vos = VEE.
Vis = VEE and Vos = VCC.
Fig 11. Test circuit for measuring OFF-state current
001aan383
HIGH
from select
input
Sn
Isw
A
Yn
VCC
Z
Vos
Vis
GND VEE
001aan384
Vis = VCC and Vos = open-circuit.
Vis = VEE and Vos = open-circuit.
Fig 12. Test circuit for measuring ON-state current
74HC_HCT4052
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 8 â 11 May 2011
© NXP B.V. 2011. All rights reserved.
11 of 28
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese