74HC4052D-T Datasheet, PDF (10/28 Pages) NXP Semiconductors – Dual 4-channel analog multiplexer/demultiplexer

NXP Semiconductors
74HC4052; 74HCT4052
Dual 4-channel analog multiplexer/demultiplexer
Table 7. Static characteristics for 74HC4052 …continued
Voltages are referenced to GND (ground = 0 V).
V_is is the input voltage at pins nYn or nZ, whichever is assigned as an input.
V_os is the output voltage at pins nZ or nYn, whichever is assigned as an output.
Symbol Parameter
Conditions
I_S(OFF)
OFF-state leakage
current
V_CC = 10.0 V; V_EE = 0 V; V_I = V_IH or V_IL;
|V_SW| = V_CC − V_EE; see Figure 11
per channel
all channels
I_S(ON)
ON-state leakage
current
V_I = V_IH or V_IL; |V_SW| = V_CC − V_EE;
V_CC = 10.0 V; V_EE = 0 V; see Figure 12
I_CC
supply current
V_EE = 0 V; V_I = V_CC or GND; V_is = V_EE or V_CC;
V_os = V_CC or V_EE
V_CC = 6.0 V
V_CC = 10.0 V
[1] All typical values are measured at T_amb = 25 °C.
Table 8. Static characteristics for 74HCT4052
Voltages are referenced to GND (ground = 0 V).
V_is is the input voltage at pins nYn or nZ, whichever is assigned as an input.
V_os is the output voltage at pins nZ or nYn, whichever is assigned as an output.
Symbol Parameter
Conditions
T_amb = −40 °C to +85 °C^[1]
V_IH
HIGH-level input
voltage
V_CC = 4.5 V to 5.5 V
V_IL
LOW-level input
V_CC = 4.5 V to 5.5 V
voltage
I_I
I_S(OFF)
input leakage current
OFF-state leakage
current
V_I = V_CC or GND; V_CC = 5.5 V; V_EE = 0 V
V_CC = 10.0 V; V_EE = 0 V; V_I = V_IH or V_IL;
|V_SW| = V_CC − V_EE; see Figure 11
per channel
all channels
I_S(ON)
I_CC
ΔI_CC
C_I
C_sw
ON-state leakage
current
supply current
additional supply
current
input capacitance
switch capacitance
V_CC = 10.0 V; V_EE = 0 V; V_I = V_IH or V_IL;
|V_SW| = V_CC − V_EE; see Figure 12
V_I = V_CC or GND; V_is = V_EE or V_CC;
V_os = V_CC or V_EE
V_CC = 5.5 V; V_EE = 0 V
V_CC = 5.0 V; V_EE = −5.0 V
per input; V_I = V_CC − 2.1 V; other inputs at V_CC
or GND; V_CC = 4.5 V to 5.5 V; V_EE = 0 V
independent pins nYn
common pins nZ
T_amb = −40 °C to +125 °C
V_IH
HIGH-level input
voltage
V_CC = 4.5 V to 5.5 V
Min Typ Max
Unit
-
-
±1.0
μA
-
-
±2.0
μA
-
-
±2.0
μA
-
-
160.0 μA
-
-
320.0 μA
Min Typ Max
Unit
2.0 1.6 -
V
-
1.2 0.8
V
-
-
±1.0
μA
-
-
±1.0
μA
-
-
±2.0
μA
-
-
±2.0
μA
-
-
80.0
μA
-
-
160.0 μA
-
45 202.5 μA
-
3.5 -
pF
-
5
-
pF
-
12 -
pF
2.0 -
-
V
74HC_HCT4052
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 8 — 11 May 2011
© NXP B.V. 2011. All rights reserved.
10 of 28