LSN2A Datasheet, PDF (1/15 Pages) Murata Manufacturing Co., Ltd. – Non-isolated, DOSA-SIP, 6/10/16A Selectable-Output DC/DC Converters

www.murata-ps.com
Typical Unit
FEATURES
■ User-selectable outputs: 0.75-5V
(D12 models) or 0.75-3.3V (W3 models)
■ 6, 10 or 16A maximum output current
■ Double lead free to RoHS standards
■ Selectable phased start-up sequencing
and tracking
■ Wide range VIN 8.3-14V or 2.4-5.5V
■ Up to 52 Watts total output power
■ Very high efficiency up to 95%
■ Starts up into pre-biased load
■ Fast settling, high di/dt IOUT slew rate
PRODUCT OVERVIEW
These miniature point-of-load (POL) switching
DC/DC converters are ideal regulation and supply
elements for distributed power and intermedi-
ate bus architectures. Fully compatible with
the Distributed-power Open Standards Alliance
specification (www.dosapower.com), LSN2’s can
power CPU’s, programmable logic and mixed-
voltage systems with little heat and low noise. A
typical application uses a master isolated 12 or
5Vdc supply and individual LSN2 converters for
local 1.8 and 3.3Vdc supplies. All system isolation
resides in the central supply, leaving lower cost
POL regulation at the load. The LSN2’s can deliver
very high power (to 52 Watts) in a tiny area with-
out heat sinking or external components. They
feature quick transient response (to 25μsec) and
very fast current slew rates (to 20A/μsec).
ORDERING GUIDE SUMMARY
Model
VOUT Range
LSN2-T/6-W3
0.75-3.3V
LSN2-T/6-D12
0.75-5V
LSN2-T/10-W3
0.75-3.3V
LSN2-T/10-D12
0.75-5V
LSN2-T/16-W3
0.75-3.3V
LSN2-T/16-D12
0.75-5V
IOUT Range
0-6A
0-6A
0-10A
0-10A
0-16A
0-16A
LSN2 Series
Non-isolated, DOSA-SIP, 6/10/16A
Selectable-Output DC/DC Converters
VIN Range
2.4-5.5V
8.3-14V
2.4-5.5V
8.3-14V
2.4-5.5V
8.3-14V
Ripple/Noise
15mVp-p
15mVp-p
15mVp-p
30mVp-p
25mVp-p
30mVp-p
Efficiency
94%
93%
95%
95%
95%
94%
INPUT CHARACTERISTICS
Parameter
Voltage Range
Current, full power
Undervoltage Shutdown
Short Circuit Current
Remote On/Off Control
Typ. @ 25°C, full load
2.4-5.5 or 8.3-14V
4.22 to 11.12A
Included
60mA
Positive or negative polarity
Notes
5V or 12V nominal models
Model dependent
With autorestart hysteresis
Output is short circuited
Default polarity is positive
OUTPUT CHARACTERISTICS
Parameter
Voltage
Current
Power Dissipation
Accuracy
Ripple & Noise
Line and Load Regulation
Overcurrent Protection
Overtemperature Protection
Efficiency (minimum)
Efficiency (typical)
Typ. @ 25°C, full load
0.75-3.3 or 0.75-5V
0-6, 0-10 or 0-16A
20, 33, 52W max.
±2% of VNOM
15-75mVpp
±0.03%
Hiccup autorecovery
+115°C shutdown
92-93%
94-95%
Notes
User adjustable, model dependent
Three ranges, model dependent
Three values, model dependent
50% load
Model dependent
Continuous short circuit protection
Model dependent
Model dependent
GENERAL SPECIFICATIONS
Parameter
Transient Response
Operating Temperature Range
Safety (designed to meet)
EMI (designed to meet)
Typ. @ 25°C, full load
25μsec
–40 to +85°C
UL/IEC/EN 60950-1
FCC pt.15, class B
Notes
50% load step to 2% of final value
With 200 lfm airflow
And CSA C22.2-No.234
May need external filter
MECHANICAL CHARACTERISTICS
6 Amp output models
0.50 x 1.00 x 0.275 inches (12.7 x 25.4 x 6.98 mm)
10 & 16 Amp models
0.50 x 2.00 x 0.32 inches (12.7 x 50.8 x 8.13 mm)
Ḥ
For full details go to
www.murata-ps.com/rohs
Pb
Lead-free
construction/attach
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
MDC_LSN2.B06 Page 1 of 15