MSK1911 Datasheet, PDF (5/6 Pages) M.S. Kennedy Corporation – HIGH PERFORMANCE, HIGH VOLTAGE VIDEO DISPLAY DRIVER

TYPICAL CONNECTION CIRCUIT
The connection circuit shown above is for the MSK 1911. Lp is an optional external component and must not be
located near ground planes if possible. Use an inductor with a high self-resonant frequency that can withstand the
currents required for the application. The ferrite beads should be located as close to the DUT as possible. Fare-Rite
Corporation P/N 2743001111 beads work well for most applications. For additional applications information, please
contact the factory. Evaluation amplifiers with test boards are readily available from M.S.Kennedy Corp.
NOTES:
5
Rev. D 8/00