MSK1911 Datasheet, PDF (1/6 Pages) M.S. Kennedy Corporation – HIGH PERFORMANCE, HIGH VOLTAGE VIDEO DISPLAY DRIVER

ISO-9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
HIGH PERFORMANCE,
HIGH VOLTAGE
VIDEO DISPLAY DRIVER
4707 Dey Road Liverpool, N.Y. 13088
1911
[phone]
FEATURES:
Internal Load Resistor for Highest Bandwidth
Ultra Fast Rise Time - 2.0nS Typical
Wide Bandwidth - 225 MHz Typical
Variable Gain - 0 to 100 V/V
On Board Reference Output
60 Vpp Output Voltage Swing
Blanking Capability
User Adjustable Brightness and Contrast
25,000 V/µSec Slew Rate
Low Cost Complete Video CRT Driver System
MIL-PRF-38534 CERTIFIED
DESCRIPTION:
The MSK 1911 is a high performance, high voltage, variable gain video amplifier capable of directly driving high
resolution video displays.
The MSK 1911 features differential inputs and a linearly adjustable gain stage with an output offset adjustment
which allows it to be a versatile performer well suited for many applications. A TTL level blanking input is available to
set the output to a predetermined black level independent of signal input.
The MSK 1911 is packaged in a cost effective, highly thermally conductive, insulated package which can be
bolted directly to a heat sink for efficient thermal management.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Resolution Mono-Chrome Displays
High Resolution RGB Displays
High Speed, High Voltage Amplification for ATE
1
PIN-OUT INFORMATION
1 Ground
2 Blank
3 VCC
4 VEE
5 -Input
6 +Input
7 Ground
8 VGAIN
9 VOFF
10 VREF
11 Ground
12 Output
13 +VHV
Rev. D 8/00