MC54-74HC595A Datasheet, PDF (5/10 Pages) Motorola, Inc – High–Performance Silicon–Gate CMOS

MC54/74HC595A
FUNCTION TABLE
Operation
Reset shift register
Reset
L
Serial
Input
A
X
Inputs
Shift
Clock
X
Latch
Clock
L, H, ↓
Output
Enable
L
Shift
Register
Contents
L
Resulting Function
Latch
Register
Contents
Serial
Output
SQH
U
L
Parallel
Outputs
QA – QH
U
Shift data into shift
register
Shift register remains
unchanged
H
D
↑
L, H, ↓
L
D → SRA;
U
SRG → SRH
U
SRN → SRN+1
H
X
L, H, ↓ L, H, ↓
L
U
U
U
U
Transfer shift register
H
X
L, H, ↓
↑
L
contents to latch register
U
SRN → LRN
U
SRN
Latch register remains
X
X
X
L, H, ↓
L
*
unchanged
U
*
U
Enable parallel outputs
X
X
X
X
L
*
**
*
Enabled
Force outputs into high
X
X
X
X
H
*
impedance state
**
*
Z
SR = shift register contents
LR = latch register contents
D = data (L, H) logic level
U = remains unchanged
↑ = Low–to–High
↓ = High–to–Low
* = depends on Reset and Shift Clock inputs
** = depends on Latch Clock input
PIN DESCRIPTIONS
INPUTS
A (Pin 14)
Serial Data Input. The data on this pin is shifted into the
8–bit serial shift register.
CONTROL INPUTS
Shift Clock (Pin 11)
Shift Register Clock Input. A low– to–high transition on this
input causes the data at the Serial Input pin to be shifted into
the 8–bit shift register.
Reset (Pin 10)
Active–low, Asynchronous, Shift Register Reset Input. A
low on this pin resets the shift register portion of this device
only. The 8–bit latch is not affected.
Latch Clock (Pin 12)
Storage Latch Clock Input. A low–to–high transition on this
input latches the shift register data.
Output Enable (Pin 13)
Active–low Output Enable. A low on this input allows the
data from the latches to be presented at the outputs. A high
on this input forces the outputs (QA–QH) into the high–
impedance state. The serial output is not affected by this
control unit.
OUTPUTS
QA – QH (Pins 15, 1, 2, 3, 4, 5, 6, 7)
Noninverted, 3–state, latch outputs.
SQH (Pin 9)
Noninverted, Serial Data Output. This is the output of the
eighth stage of the 8–bit shift register. This output does not
have three–state capability.
High–Speed CMOS Logic Data
5
DL129 — Rev 6
MOTOROLA