MC88LV926 Datasheet, PDF (3/10 Pages) Motorola, Inc – LOW SKEW CMOS PLL 68060 CLOCK DRIVER

MC88LV926
MAXIMUM RATINGS*
Symbol
Parameter
Limits
Unit
VCC, AVCC
DC Supply Voltage Referenced to GND
–0.5 to 7.0
V
Vin
DC Input Voltage (Referenced to GND)
–0.5 to VCC +0.5
V
Vout
DC Output Voltage (Referenced to GND)
–0.5 to VCC +0.5
V
Iin
DC Input Current, Per Pin
±20
mA
Iout
DC Output Sink/Source Current, Per Pin
±50
mA
ICC
DC VCC or GND Current Per Output Pin
±50
mA
Tstg
Storage Temperature
–65 to +150
°C
* Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the
Recommended Operating Conditions.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Vin
Vout
TA
ESD
Parameter
Supply Voltage
DC Input Voltage
DC Output Voltage
Ambient Operating Temperature
Static Discharge Voltage
Limits
Unit
3.3 ±0.3
V
0 to VCC
V
0 to VCC
V
0 to 70
°C
> 1500
V
DC CHARACTERISTICS (TA = 0°C to 70°C; VCC = 3.3V ± 0.3V)⁴
Symbol
VIH
Parameter
Minimum High Level Input Voltage
VIL
Minimum Low Level Input Voltage
VOH
Minimum High Level Output Voltage
VCC
3.0
3.3
3.0
3.3
3.0
3.3
Guaranteed Limits
2.0
2.0
0.8
0.8
2.2
2.5
Unit
Condition
V
VOUT = 0.1V or
VCC – 0.1V
V
VOUT = 0.1V or
VCC – 0.1V
V
VIN = VIH or VIL
IOH
–36mA
–36mA
VOL
Minimum Low Level Output Voltage
3.0
3.3
0.55
V
VIN = VIH or VIL
0.55
IOH
+36mA¹
+36mA
IIN
Maximum Input Leakage Current
3.3
ICCT
Maximum ICC/Input
3.3
IOLD
Minimum Dynamic³ Output Current
3.3
±1.0
2.0 ²
88
µA
VI = VCC, GND
mA
VI = VCC – 2.1V
mA
VOLD = 1.0V Max
IOHD
3.3
–88
mA
VOHD = 3.85 Min
ICC
Maximum Quiescent Supply Current
3.3
750
µA
VI = VCC, GND
1. IOL is +12mA for the RST_OUT output.
2. The PLL_EN input pin is not guaranteed to meet this specification.
3. Maximum test duration 2.0ms, one output loaded at a time.
4. The MC88LV926 can also be operated from a 5.0V supply. VOH output levels will vary 1:1 with VCC, input levels and current specs will be
unchanged.
TIMING SOLUTIONS
3
BR1333 — REV 5
MOTOROLA