MRF372 Datasheet, PDF (12/12 Pages) Motorola, Inc – SEMICONDUCTOR TECHNICAL DATA

PACKAGE DIMENSIONS
ccc M T A M
R (LID)
S (INSULATOR)
bbb M T A M
E
G4
L
BM
J
2X Q
bbb M T A M B M
1
2
4X K
3
5
4
4X D
BM
bbb M T A M B M
B (FLANGE)
B
ccc M T A M B M
N
F
(LID)
H
M
(INSULATOR)
C
T
SEATING
PLANE
bbb M T A M B M
A
A
CASE 375G–04
ISSUE E
NI–860C3
NOTES:
1. CONTROLLING DIMENSION: INCH.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M-1994.
3. DIMENSION H TO BE MEASURED 0.030 (0.762)
AWAY FROM PACKAGE BODY.
4. RECOMMENDED BOLT CENTER DIMENSION
OF 1.140 (28.96) BASED ON 3M SCREW.
INCHES
DIM MIN MAX
A 1.335 1.345
B 0.380 0.390
C 0.180 0.224
D 0.325 0.335
E 0.060 0.070
F 0.004 0.006
G
1.100 BSC
H 0.097 0.107
J 0.2125 BSC
K 0.135 0.165
L
0.425 BSC
M 0.852 0.868
N 0.851 0.869
Q 0.118 0.138
R 0.395 0.405
S 0.394 0.406
bbb 0.010 REF
ccc 0.015 REF
STYLE 1:
PIN 1. DRAIN
2. DRAIN
3. GATE
4. GATE
5. SOURCE
MILLIMETERS
MIN MAX
33.91 34.16
9.65 9.91
4.57 5.69
8.26 8.51
1.52 1.78
0.10 0.15
27.94 BSC
2.46 2.72
5.397 BSC
3.43 4.19
10.8 BSC
21.64 22.05
21.62 22.07
3.00 3.30
10.03 10.29
10.01 10.31
0.25 REF
0.38 REF
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
MOTOROLA and the logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.
E Motorola, Inc. 2002.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3–20–1, Minami–Azabu. Minato–ku, Tokyo 106–8573 Japan. 81–3–3440–3569
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 852–26668334
Technical Information Center: 1–800–521–6274
HOME PAGE: http://www.motorola.com/semiconductors/
◊
MRF372/D