TA100PW Datasheet, PDF (1/5 Pages) MORNSUN Science& Technology Ltd. – Isolated Transmitter

Isolated Transmitter
TAxxxPW series
Programmable analog isolators with isolated power
output
FEATURES
l 3-port electrical isolation between input, output
and power supply
l 12.5mm slim case
l High accuracy (0.1% F.S.)
l High linearity (0.1% F.S.)
l Low temperature drift(50PPM/°C)
l Low-power dissipation
l Excellent EMC performance
l Mini USB port communication
l Input / Output range programmable
l High reliability(MTBF>500,000 hours)
AxxxPW series analog isolator and isolator with isolation power output which are mainly applied in industrial automation systems can
isolated convert analog input signal of the industrial field instruments to the matched analog output signal for the DCS/PLC, realizing the
acquisition and transmission of field signal. An independent power supply is needed for the product and the port of power supply, input
and output are isolated from each other. This series of products contain combinations of 1 input 1 output, 1 input 2 output, 2 input 2 output
and so on. The thickness of 12.5mm meet the need for high density field installation.
Selection Guide
Transformation types
1 input 1 output
2 input 2 output
1 input 2 output
Current input, Current output (Isolator)
Current input, Voltage output (Isolator)
Voltage input, Voltage output (Isolator)
Voltage input, Current output (Isolator)
Current input, Current output
(Isolators with isolated power output)
Current input, Voltage output
(Isolators with isolated power output)
Input signal
--
TA100PW
TA120PW
TA130PW
TA140PW
TA105PW
TA125PW
TA200PW
TA220PW
TA230PW
TA240PW
TA205PW
TA225PW
TA600PW
TA620PW
TA630PW
TA640PW
TA605PW
TA625PW
Input type
Current input
Voltage input
Input signal
4~20mA / 0~20mA（Programmable）
0~5V / 0~10V / 1~5V / 2~10V（Programmable）
Output signal
--
Output type
Current output
Voltage output
Output signal
4~20mA / 0~20mA（Programmable）
0~5V / 0~10V / 1~5V / 2~10V（Programmable）
Note:1. Customers need to choose the type of the input signal, output signal and range. We could also offer customer design for special input and output;
2. You can get the USB Adapter T-01 for the isolator from MORNSUN free of charge if you need.
Input Specifications
Item
Input voltage
Operating Conditions
Power input parameters
Power dissipation (isolators)
Power dissipation
(isolators with isolated power output)
Power protection
Field Area
Input impedance
Isolation power output
Distribution output protection
Value
18~30VDC(Typical values 24VDC)
1 input 1output≤0.9W
1 input 2 output, 2 input 2 output≤1.2W
1 input 1output≤1.5W
1 input 2 output, 2 input 2 output≤2.5W
Reverse polarity protection, over-voltage protection
≤ 25Ω（Input current signal）
≥500KΩ（Input voltage signal）
No-load 24VDC±10%, 20mA output ≥ 20VDC
Short-circuit protection
2014.02.18-A/2
Page 1 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation