M34513M2 Datasheet, PDF (95/106 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER

PRELIMINARY _{NSocothimcaene:gpTeah.riasmisetnrioct} ^{laimfiintsalasrepescuibfijceacttioton.}
MITSUBISHI MICROCOMPUTERS
4513/4514 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
GZZ-SH52-44B <81A0>
4500 SERIES MASK ROM ORDER CONFIRMATION FORM
SINGLE-CHIP MICROCOMPUTER M34513M4-XXXSP/FP
MITSUBISHI ELECTRIC
Please fill in all items marked V .
Mask ROM number
Date:
Section head Supervisor
signature
signature
Company
name
V Customer
Date
issued
Date:
TEL (
Responsible
officer
Supervisor
)
V 1. Confirmation
Specify the type of EPROMs submitted.
Three sets of EPROMs are required for each pattern (check in the approximate box).
If at least two of the three sets of EPROMs submitted contain the identical data, we will produce
masks based on this data. We shall assume the responsibility for errors only if the mask ROM data
on the products we produce differ from this data. Thus, the customer must be especially careful in
verifying the data contained in the EPROMs submitted.
Microcomputer name:
M34513M4-XXXSP
M34513M4-XXXFP
Checksum code for entire EPROM area
(hexadecimal notation)
EPROM Type:
27C256
27C512
000016
Low-order
4.00K
5-bit data _0FFF16
400016 4.00K
,,,High-order
5-bit data _4FFF16
,,,_7FFF16
,,, ^{Set “FF16” in the shaded area.}
000016
Low-order
4.00K
5-bit data _0FFF16
400016
,,, _High-order
4.00K
5-bit data _4FFF16
,,,,,,^FFFF16
Set “1112” in the area
of low-order and high-order 5-bit data.
V 2. Mark Specification
Mark specification must be submitted using the correct form for the type of package being ordered.
Fill out the approximate Mark Specification Form (32P4B for M34513M4-XXXSP, 32P6B-A for
M34513M4-XXXFP) and attach to the Mask ROM Order Confirmation Form.
V 3. Comments
95