M34513M2 Datasheet, PDF (50/106 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER

PRELIMINARY _{NSocothimcaene:gpTeah.riasmisetnrioct} ^{laimfiintsalasrepescuibfijceacttioton.}
VOLTAGE DROP DETECTION CIRCUIT
The built-in voltage drop detection circuit is designed to detect a
drop in voltage and to reset the microcomputer if the supply voltage
drops below a set value.
MITSUBISHI MICROCOMPUTERS
4513/4514 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
RESET pin
Internal reset signal
Voltage drop detection circuit
Watchdog timer output
WEF
Note: The output structure of RESET pin is N-channel open-drain.
Fig. 36 Voltage drop detection reset circuit
VDD
VRST (detection voltage)
Voltage drop detection
circuit output
RESET pin
The microcomputer starts
operation after f(XIN) is counted
16892 to 16895 times.
Notes 1: Pull-up RESET pin externally.
2: Refer to the voltage drop detection circuit in the electrical characteristics
for the rating value of VRST (detection voltage).
Fig. 37 Voltage drop detection circuit operation waveform
50