PS21963-4E_09 Datasheet, PDF (6/10 Pages) Mitsubishi Electric Semiconductor – Dual-In-Line Package Intelligent Power Module

MITSUBISHI SEMICONDUCTOR <Dual-In-Line Package Intelligent Power Module>
PS21963-4E/-4AE/-4CE/-4EW
TRANSFER-MOLD TYPE
INSULATED TYPE
CONTROL (PROTECTION) PART
Symbol
Parameter
Condition
ID
VFOH
VFOL
VSC(ref)
IIN
UVDBt
UVDBr
UVDt
UVDr
tFO
Vth(on)
Vth(off)
Vth(hys)
Circuit current
Fault output voltage
Short circuit trip level
Input current
Control supply under-voltage
protection
Fault output pulse width
ON threshold voltage
OFF threshold voltage
ON/OFF threshold hysteresis
voltage
VD = VDB = 15V Total of VP1-VNC, VN1-VNC
VIN = 5V
VUFB-U, VVFB-V, VWFB-W
VD = VDB = 15V Total of VP1-VNC, VN1-VNC
VIN = 0V
VUFB-U, VVFB-V, VWFB-W
VSC = 0V, FO terminal pull-up to 5V by 10kΩ
VSC = 1V, IFO = 1mA
Tj = 25°C, VD = 15V
(Note 4)
VIN = 5V
Trip level
Tj ≤ 125°C
Reset level
Trip level
Reset level
(Note 5)
Applied between UP, VP, WP, UN, VN, WN-VNC
Limits
Unit
Min.
Typ.
Max.
—
—
2.80 mA
—
—
0.55 mA
—
—
2.80 mA
—
—
0.55 mA
4.9
—
—
V
—
—
0.95
V
0.43
0.48
0.53
V
0.70
1.00
1.50
mA
10.0
—
12.0
V
10.5
—
12.5
V
10.3
—
12.5
V
10.8
—
13.0
V
20
—
—
µs
—
2.1
2.6
V
0.8
1.3
—
V
0.35
0.65
—
V
Note 4 : Short circuit protection is functioning only for the lower-arms. Please select the external shunt resistance such that the SC trip-level is
less than 1.7 times of the current rating.
5 : Fault signal is asserted corresponding to a short circuit or lower side control supply under-voltage failure.
MECHANICAL CHARACTERISTICS AND RATINGS
Parameter
Condition
Limits
Min.
Typ.
Max. ^Unit
Mounting torque
Weight
Heat-sink flatness
Mounting screw : M3
Recommended : 0.69 N·m 0.59
—
0.78 N·m
(Note 6)
—
10
—
g
(Note 7) –50
—
100
µm
Note 6 : Plain washers (ISO 7089~7094) are recommended.
Note 7: Flatness measurement position
+–
Heat sink side
Measurement position
4.6mm
DIP-IPM
–
+
Heat sink side
Aug. 2007
6