M306V5ME Datasheet, PDF (53/262 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306V5ME-XXXSP
M306V5EESP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
2.7.18 Address Match Interrupt
An address match interrupt is generated when the address match interrupt address register contents
match the program counter value. Two address match interrupts can be set, each of which can be
enabled and disabled by an address match interrupt enable bit. Address match interrupts are not af-
fected by the interrupt enable flag (I flag) and processor interrupt priority level (IPL). The value of the
program counter (PC) for an address match interrupt varies depending on the instruction being executed.
Figures 2.7.12 and 2.7.13 show the address match interrupt-related registers.
Address match interrupt enable register
b7 b6 b5 b4 b3 b2 b1 b0
Symbol
AIER
Address
000916
When reset
XXXXXX00 2
Bit symbol
AIER0
Bit name
Address match interrupt 0
enable bit
AIER1 Address match interrupt 1
enable bit
Function
0 : Interrupt disabled
1 : Interrupt enabled
0 : Interrupt disabled
1 : Interrupt enabled
Nothing is assigned.
In an attempt to write to these bits, write “0”. The value, if read, turns out to
be indeterminated.
RW
Figure 2.7.12 Address match interrupt enable register
Address match interrupt register i (i = 0, 1)
(b23)
b7
(b19)
b3
(b16)(b15)
b0 b7
(b8)
b0 b7
Symbol
b0 _RMAD0
RMAD1
Address
001216 to 001016
001616 to 001416
When reset
X00000 16
X00000 16
Function
Values that can be set R W
Address setting register for address match interrupt 0000016 to FFFFF16
Nothing is assigned.
In an attempt to write to these bits, write “0”. The value, if read, turns out to
be indeterminated.
Figure 2.7.13 Address match interrupt register i (i = 0, 1)
Rev. 1.0
53